Re: [PATCH v4 1/2] DT: iio: vadc: document dt binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/11/14 00:01, Hartmut Knaack wrote:
> Ivan T. Ivanov schrieb am 03.11.2014 16:24:
>> From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
>>
>> Document DT binding for Qualcomm SPMI PMIC voltage ADC
>> driver.
>>
>> Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
>> Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
This looks more or less fine to me.  One probable typo inline.

As Mark was kind enough to review the earlier version I'd like
to let it sit for a while to see if he has time to have another look
(perhaps at v5 with the trivial bits fixed up!)
>> ---
>>  .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 129 +++++++++++++++++++++
>>  include/dt-bindings/iio/qcom,spmi-vadc.h           | 119 +++++++++++++++++++
>>  2 files changed, 248 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
>>  create mode 100644 include/dt-bindings/iio/qcom,spmi-vadc.h
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
>> new file mode 100644
>> index 0000000..2253813
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
>> @@ -0,0 +1,129 @@
>> +Qualcomm's SPMI PMIC voltage ADC
>> +
>> +SPMI PMIC voltage ADC (VADC) provides interface to clients to read
>> +voltage. The VADC is a 15-bit sigma-delta ADC.
>> +
>> +VADC node:
>> +
>> +- compatible:
>> +    Usage: required
>> +    Value type: <string>
>> +    Definition: Should contain "qcom,spmi-vadc".
>> +
>> +- reg:
>> +    Usage: required
>> +    Value type: <prop-encoded-array>
>> +    Definition: VADC base address and length in the SPMI PMIC register map.
>> +
>> +- #address-cells:
>> +    Usage: required
>> +    Value type: <u32>
>> +    Definition: Must be one. Child node 'reg' property should define ADC
>> +            channel number.
>> +
>> +- #size-cells:
>> +    Usage: required
>> +    Value type: <u32>
>> +    Definition: Must be zero.
>> +
>> +- #io-channel-cells:
>> +    Usage: required
>> +    Value type: <u32>
>> +    Definition: Must be one. For details about IIO bindings see:
>> +            Documentation/devicetree/bindings/iio/iio-bindings.txt
>> +
>> +- interrupts:
>> +    Usage: optional
>> +    Value type: <prop-encoded-array>
>> +    Definition: End of conversion interrupt.
>> +
>> +Channel node properties:
>> +
>> +- reg:
>> +    Usage: required
>> +    Value type: <u32>
>> +    Definition: ADC channel number.
>> +            See include/dt-bindings/iio/qcom,spmi-vadc.h
>> +
>> +- qcom,decimation:
>> +    Usage: optional
>> +    Value type: <u32>
>> +    Definition: This parameters is used to decrease ADC sampling rate.
> Typo: This parameter (singular)
>> +            Quicker measurements can be made by reducing decimation ratio.
>> +            Valid values are 512, 1024, 2048, 4096.
>> +            If property is not found, default value of 512 will be used.
>> +
>> +- qcom,pre-scaling:
>> +    Usage: optional
>> +    Value type: <u32 array>
>> +    Definition: Used for scaling the channel input signal before the signal is
>> +            fed to VADC. The configuration for this node is to know the
>> +            pre-determined ratio and use it for post scaling. Select one from
>> +            the following options.
>> +            <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
>> +            If property is not found default value depending of chip will be used.
on chip?
>> +
>> +- qcom,ratiometric:
>> +    Usage: optional
>> +    Value type: <empty>
>> +    Definition: Channel calibration type. If this property is specified
>> +            VADC will use the VDD reference (1.8V) and GND for channel
>> +            calibration. If property is not found, channel will be
>> +            calibrated with 0.625V and 1.25V reference channels, also
>> +            known as absolute calibration.
>> +
>> +- qcom,hw-settle-time:
>> +    Usage: optional
>> +    Value type: <u32>
>> +    Definition: Time between AMUX getting configured and the ADC starting
>> +            conversion. Delay = 100us * (value) for value < 11, and
>> +            2ms * (value - 10) otherwise.
>> +            Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
>> +            900 us and 1, 2, 4, 6, 8, 10 ms
>> +            If property is not found, channel will use 0us.
>> +
>> +- qcom,avg-samples:
>> +    Usage: optional
>> +    Value type: <u32>
>> +    Definition: Number of samples to be used for measurement.
>> +            Averaging provides the option to obtain a single measurement
>> +            from the ADC that is an average of multiple samples. The value
>> +            selected is 2^(value).
>> +            Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
>> +            If property is not found, 1 sample will be used.
>> +
>> +NOTE:
>> +
>> +Following channels, also know as reference points channels, are used for
> Typos: <...> also known as reference point channels <...>
>> +result calibration and their channel configuration nodes should be defined:
>> +VADC_REF_625MV and/or VADC_SPARE1, based on PMIC version, VADC_REF_1250MV,
> Better put the "based on PMIC version" into parenthesis.
>> +VADC_GND_REF and VADC_VDD_VADC.
>> +
>> +Example:
>> +
>> +	/* VADC node */
>> +	pmic_vadc: vadc@3100 {
>> +		compatible = "qcom,spmi-vadc";
>> +		reg = <0x3100 0x100>;
>> +		interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		#io-channel-cells = <1>;
>> +		io-channel-ranges;
>> +
>> +		/* Channel node */
>> +		usb_id_nopull {
>> +			reg = <VADC_LR_MUX10_USB_ID>;
>> +			qcom,decimation = <512>;
>> +			qcom,ratiometric;
>> +			qcom,hw-settle-time = <200>;
>> +			qcom,avg-samples = <1>;
>> +			qcom,pre-scaling = <1 3>;
>> +		};
>> +	};
>> +
>> +	/* IIO client node */
>> +	usb {
>> +		io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>;
>> +		io-channel-names = "vadc";
>> +	};
>> diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h
>> new file mode 100644
>> index 0000000..42121fa
>> --- /dev/null
>> +++ b/include/dt-bindings/iio/qcom,spmi-vadc.h
>> @@ -0,0 +1,119 @@
>> +/*
>> + * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_H
>> +#define _DT_BINDINGS_QCOM_SPMI_VADC_H
>> +
>> +/* Voltage ADC channels */
>> +#define VADC_USBIN				0x00
>> +#define VADC_DCIN				0x01
>> +#define VADC_VCHG_SNS				0x02
>> +#define VADC_SPARE1_03				0x03
>> +#define VADC_USB_ID_MV				0x04
>> +#define VADC_VCOIN				0x05
>> +#define VADC_VBAT_SNS				0x06
>> +#define VADC_VSYS				0x07
>> +#define VADC_DIE_TEMP				0x08
>> +#define VADC_REF_625MV				0x09
>> +#define VADC_REF_1250MV				0x0a
>> +#define VADC_CHG_TEMP				0x0b
>> +#define VADC_SPARE1				0x0c
>> +#define VADC_SPARE2				0x0d
>> +#define VADC_GND_REF				0x0e
>> +#define VADC_VDD_VADC				0x0f
>> +
>> +#define VADC_P_MUX1_1_1				0x10
>> +#define VADC_P_MUX2_1_1				0x11
>> +#define VADC_P_MUX3_1_1				0x12
>> +#define VADC_P_MUX4_1_1				0x13
>> +#define VADC_P_MUX5_1_1				0x14
>> +#define VADC_P_MUX6_1_1				0x15
>> +#define VADC_P_MUX7_1_1				0x16
>> +#define VADC_P_MUX8_1_1				0x17
>> +#define VADC_P_MUX9_1_1				0x18
>> +#define VADC_P_MUX10_1_1			0x19
>> +#define VADC_P_MUX11_1_1			0x1a
>> +#define VADC_P_MUX12_1_1			0x1b
>> +#define VADC_P_MUX13_1_1			0x1c
>> +#define VADC_P_MUX14_1_1			0x1d
>> +#define VADC_P_MUX15_1_1			0x1e
>> +#define VADC_P_MUX16_1_1			0x1f
>> +
>> +#define VADC_P_MUX1_1_3				0x20
>> +#define VADC_P_MUX2_1_3				0x21
>> +#define VADC_P_MUX3_1_3				0x22
>> +#define VADC_P_MUX4_1_3				0x23
>> +#define VADC_P_MUX5_1_3				0x24
>> +#define VADC_P_MUX6_1_3				0x25
>> +#define VADC_P_MUX7_1_3				0x26
>> +#define VADC_P_MUX8_1_3				0x27
>> +#define VADC_P_MUX9_1_3				0x28
>> +#define VADC_P_MUX10_1_3			0x29
>> +#define VADC_P_MUX11_1_3			0x2a
>> +#define VADC_P_MUX12_1_3			0x2b
>> +#define VADC_P_MUX13_1_3			0x2c
>> +#define VADC_P_MUX14_1_3			0x2d
>> +#define VADC_P_MUX15_1_3			0x2e
>> +#define VADC_P_MUX16_1_3			0x2f
>> +
>> +#define VADC_LR_MUX1_BAT_THERM			0x30
>> +#define VADC_LR_MUX2_BAT_ID			0x31
>> +#define VADC_LR_MUX3_XO_THERM			0x32
>> +#define VADC_LR_MUX4_AMUX_THM1			0x33
>> +#define VADC_LR_MUX5_AMUX_THM2			0x34
>> +#define VADC_LR_MUX6_AMUX_THM3			0x35
>> +#define VADC_LR_MUX7_HW_ID			0x36
>> +#define VADC_LR_MUX8_AMUX_THM4			0x37
>> +#define VADC_LR_MUX9_AMUX_THM5			0x38
>> +#define VADC_LR_MUX10_USB_ID			0x39
>> +#define VADC_AMUX_PU1				0x3a
>> +#define VADC_AMUX_PU2				0x3b
>> +#define VADC_LR_MUX3_BUF_XO_THERM		0x3c
>> +
>> +#define VADC_LR_MUX1_PU1_BAT_THERM		0x70
>> +#define VADC_LR_MUX2_PU1_BAT_ID			0x71
>> +#define VADC_LR_MUX3_PU1_XO_THERM		0x72
>> +#define VADC_LR_MUX4_PU1_AMUX_THM1		0x73
>> +#define VADC_LR_MUX5_PU1_AMUX_THM2		0x74
>> +#define VADC_LR_MUX6_PU1_AMUX_THM3		0x75
>> +#define VADC_LR_MUX7_PU1_AMUX_HW_ID		0x76
>> +#define VADC_LR_MUX8_PU1_AMUX_THM4		0x77
>> +#define VADC_LR_MUX9_PU1_AMUX_THM5		0x78
>> +#define VADC_LR_MUX10_PU1_AMUX_USB_ID		0x79
>> +#define VADC_LR_MUX3_BUF_PU1_XO_THERM		0x7c
>> +
>> +#define VADC_LR_MUX1_PU2_BAT_THERM		0xb0
>> +#define VADC_LR_MUX2_PU2_BAT_ID			0xb1
>> +#define VADC_LR_MUX3_PU2_XO_THERM		0xb2
>> +#define VADC_LR_MUX4_PU2_AMUX_THM1		0xb3
>> +#define VADC_LR_MUX5_PU2_AMUX_THM2		0xb4
>> +#define VADC_LR_MUX6_PU2_AMUX_THM3		0xb5
>> +#define VADC_LR_MUX7_PU2_AMUX_HW_ID		0xb6
>> +#define VADC_LR_MUX8_PU2_AMUX_THM4		0xb7
>> +#define VADC_LR_MUX9_PU2_AMUX_THM5		0xb8
>> +#define VADC_LR_MUX10_PU2_AMUX_USB_ID		0xb9
>> +#define VADC_LR_MUX3_BUF_PU2_XO_THERM		0xbc
>> +
>> +#define VADC_LR_MUX1_PU1_PU2_BAT_THERM		0xf0
>> +#define VADC_LR_MUX2_PU1_PU2_BAT_ID		0xf1
>> +#define VADC_LR_MUX3_PU1_PU2_XO_THERM		0xf2
>> +#define VADC_LR_MUX4_PU1_PU2_AMUX_THM1		0xf3
>> +#define VADC_LR_MUX5_PU1_PU2_AMUX_THM2		0xf4
>> +#define VADC_LR_MUX6_PU1_PU2_AMUX_THM3		0xf5
>> +#define VADC_LR_MUX7_PU1_PU2_AMUX_HW_ID		0xf6
>> +#define VADC_LR_MUX8_PU1_PU2_AMUX_THM4		0xf7
>> +#define VADC_LR_MUX9_PU1_PU2_AMUX_THM5		0xf8
>> +#define VADC_LR_MUX10_PU1_PU2_AMUX_USB_ID	0xf9
>> +#define VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM	0xfc
>> +
>> +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_H */
>>
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux