On Thu, Sep 08, 2022 at 04:44:57PM +0800, Tao Zhang wrote: > Add property "qcom,dsb-elem-size" to support DSB element for TPDA. > Specifies the DSB element size supported by each monitor connected > to the aggregator on each port. Should be specified in pairs (port, > dsb element size). What is DSB? > > Signed-off-by: Tao Zhang <quic_taozha@xxxxxxxxxxx> > --- > Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml > index eb9bfc5..1bb3fdf 100644 > --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml > +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml > @@ -40,6 +40,13 @@ properties: > minItems: 1 > maxItems: 2 > > + qcom,dsb-elem-size: > + description: | > + Specifies the DSB element size supported by each monitor > + connected to the aggregator on each port. Should be specified > + in pairs (port, dsb element size). > + $ref: /schemas/types.yaml#/definitions/uint32-array The binding (not yet upstream) says there is just 1 port (port 0). So why do you need more than a single uint32? Rob
