On Mon, 12 Sept 2022 at 16:17, Caleb Connolly <caleb@xxxxxxxxxxxxx> wrote: > > > > On 10/09/2022 18:02, Dang Huynh wrote: > > While working on the Fxtec Pro1X device, this error shows up with > > my own minimal configuration: > > > > gcc-sm6115: probe of 1400000.clock-controller failed with error -38 > > > > The clock driver depends on CONFIG_QCOM_GDSC and after enabling > > that, the driver probes successfully. > > > > Signed-off-by: Dang Huynh <danct12@xxxxxxxxxx> > > --- > > drivers/clk/qcom/Kconfig | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig > > index 1cf1ef70e347..d566fbdebdf9 100644 > > --- a/drivers/clk/qcom/Kconfig > > +++ b/drivers/clk/qcom/Kconfig > > @@ -645,6 +645,7 @@ config SM_DISPCC_6350 > > > > config SM_GCC_6115 > > tristate "SM6115 and SM4250 Global Clock Controller" > > + select QCOM_GDSC > > depends on QCOM_GDSC All other Qualcomm clock drivers select the GDSC if required, so I'd tend to disagree. -- With best wishes Dmitry
