[RFC PATCH 03/10] thermal/drivers/tsens: drop single-cell code for msm8939

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is no dtsi file for msm8939 in the kernel sources. Drop the
compatibility with unofficial dtsi and remove support for handling the
single-cell calibration data on msm8939.

Cc: Shawn Guo <shawn.guo@xxxxxxxxxx>
Cc: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/thermal/qcom/tsens-v0_1.c | 129 +-----------------------------
 1 file changed, 1 insertion(+), 128 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 2974eea578f4..add5d9dbc9d4 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -48,63 +48,6 @@
 #define MSM8916_CAL_SEL_MASK	0xe0000000
 #define MSM8916_CAL_SEL_SHIFT	29
 
-/* eeprom layout data for 8939 */
-#define MSM8939_BASE0_MASK	0x000000ff
-#define MSM8939_BASE1_MASK	0xff000000
-#define MSM8939_BASE0_SHIFT	0
-#define MSM8939_BASE1_SHIFT	24
-
-#define MSM8939_S0_P1_MASK	0x000001f8
-#define MSM8939_S1_P1_MASK	0x001f8000
-#define MSM8939_S2_P1_MASK_0_4	0xf8000000
-#define MSM8939_S2_P1_MASK_5	0x00000001
-#define MSM8939_S3_P1_MASK	0x00001f80
-#define MSM8939_S4_P1_MASK	0x01f80000
-#define MSM8939_S5_P1_MASK	0x00003f00
-#define MSM8939_S6_P1_MASK	0x03f00000
-#define MSM8939_S7_P1_MASK	0x0000003f
-#define MSM8939_S8_P1_MASK	0x0003f000
-#define MSM8939_S9_P1_MASK	0x07e00000
-
-#define MSM8939_S0_P2_MASK	0x00007e00
-#define MSM8939_S1_P2_MASK	0x07e00000
-#define MSM8939_S2_P2_MASK	0x0000007e
-#define MSM8939_S3_P2_MASK	0x0007e000
-#define MSM8939_S4_P2_MASK	0x7e000000
-#define MSM8939_S5_P2_MASK	0x000fc000
-#define MSM8939_S6_P2_MASK	0xfc000000
-#define MSM8939_S7_P2_MASK	0x00000fc0
-#define MSM8939_S8_P2_MASK	0x00fc0000
-#define MSM8939_S9_P2_MASK_0_4	0xf8000000
-#define MSM8939_S9_P2_MASK_5	0x00002000
-
-#define MSM8939_S0_P1_SHIFT	3
-#define MSM8939_S1_P1_SHIFT	15
-#define MSM8939_S2_P1_SHIFT_0_4	27
-#define MSM8939_S2_P1_SHIFT_5	0
-#define MSM8939_S3_P1_SHIFT	7
-#define MSM8939_S4_P1_SHIFT	19
-#define MSM8939_S5_P1_SHIFT	8
-#define MSM8939_S6_P1_SHIFT	20
-#define MSM8939_S7_P1_SHIFT	0
-#define MSM8939_S8_P1_SHIFT	12
-#define MSM8939_S9_P1_SHIFT	21
-
-#define MSM8939_S0_P2_SHIFT	9
-#define MSM8939_S1_P2_SHIFT	21
-#define MSM8939_S2_P2_SHIFT	1
-#define MSM8939_S3_P2_SHIFT	13
-#define MSM8939_S4_P2_SHIFT	25
-#define MSM8939_S5_P2_SHIFT	14
-#define MSM8939_S6_P2_SHIFT	26
-#define MSM8939_S7_P2_SHIFT	6
-#define MSM8939_S8_P2_SHIFT	18
-#define MSM8939_S9_P2_SHIFT_0_4	27
-#define MSM8939_S9_P2_SHIFT_5	13
-
-#define MSM8939_CAL_SEL_MASK	0x7
-#define MSM8939_CAL_SEL_SHIFT	0
-
 /* eeprom layout data for 8974 */
 #define BASE1_MASK		0xff
 #define S0_P1_MASK		0x3f00
@@ -286,77 +229,7 @@ static int calibrate_8916(struct tsens_priv *priv)
 
 static int calibrate_8939(struct tsens_priv *priv)
 {
-	int base0 = 0, base1 = 0, i;
-	u32 p1[10], p2[10];
-	int mode = 0;
-	u32 *qfprom_cdata;
-	u32 cdata[6];
-	int ret;
-
-	ret = tsens_calibrate_nvmem(priv, 2);
-	if (!ret)
-		return 0;
-
-	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
-	if (IS_ERR(qfprom_cdata))
-		return PTR_ERR(qfprom_cdata);
-
-	/* Mapping between qfprom nvmem and calibration data */
-	cdata[0] = qfprom_cdata[12];
-	cdata[1] = qfprom_cdata[13];
-	cdata[2] = qfprom_cdata[0];
-	cdata[3] = qfprom_cdata[1];
-	cdata[4] = qfprom_cdata[22];
-	cdata[5] = qfprom_cdata[21];
-
-	mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
-	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
-
-	switch (mode) {
-	case TWO_PT_CALIB:
-		base1 = (cdata[3] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
-		p2[0] = (cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
-		p2[1] = (cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
-		p2[2] = (cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
-		p2[3] = (cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
-		p2[4] = (cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
-		p2[5] = (cdata[2] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
-		p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
-		p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
-		p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
-		p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
-		p2[9] |= ((cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5) << 5;
-		for (i = 0; i < priv->num_sensors; i++)
-			p2[i] = (base1 + p2[i]) << 2;
-		fallthrough;
-	case ONE_PT_CALIB2:
-		base0 = (cdata[2] & MSM8939_BASE0_MASK) >> MSM8939_BASE0_SHIFT;
-		p1[0] = (cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT;
-		p1[1] = (cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT;
-		p1[2] = (cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4;
-		p1[2] |= ((cdata[1] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5) << 5;
-		p1[3] = (cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT;
-		p1[4] = (cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT;
-		p1[5] = (cdata[2] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT;
-		p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
-		p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT;
-		p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
-		p1[9] = (cdata[4] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
-		for (i = 0; i < priv->num_sensors; i++)
-			p1[i] = ((base0) + p1[i]) << 2;
-		break;
-	default:
-		for (i = 0; i < priv->num_sensors; i++) {
-			p1[i] = 500;
-			p2[i] = 780;
-		}
-		break;
-	}
-
-	compute_intercept_slope(priv, p1, p2, mode);
-	kfree(qfprom_cdata);
-
-	return 0;
+	return tsens_calibrate_nvmem(priv, 2);
 }
 
 static int calibrate_8974(struct tsens_priv *priv)
-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux