In the PCS region, registers QPHY_V5_PCS_EQ_CONFIG4 and
QPHY_V5_PCS_EQ_CONFIG5 should be used instead of QPHY_V5_PCS_EQ_CONFIG2
and QPHY_V5_PCS_EQ_CONFIG3.
This causes high latency when ASPM is enabled, so fix it!
Fixes: 2c91bf6bf290 ("phy: qcom-qmp: Add SM8450 PCIe1 PHY support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 4 ++--
drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 4648467d5cac..b508903d77d0 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1332,8 +1332,8 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
};
static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG4, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG5, 0x22),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
};
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
index 61a44519f969..cca6455ec98c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
@@ -11,7 +11,7 @@
#define QPHY_V5_PCS_G3S2_PRE_GAIN 0x170
#define QPHY_V5_PCS_RX_SIGDET_LVL 0x188
#define QPHY_V5_PCS_RATE_SLEW_CNTRL1 0x198
-#define QPHY_V5_PCS_EQ_CONFIG2 0x1e0
-#define QPHY_V5_PCS_EQ_CONFIG3 0x1e4
+#define QPHY_V5_PCS_EQ_CONFIG4 0x2e0
+#define QPHY_V5_PCS_EQ_CONFIG5 0x2e4
#endif
--
2.25.1
