Change a53-pll driver to use clk_parent_data rather than always looking
up the xo clock in the system clock list.
Note, this change also switches the a53-pll from the global `xo' clock
to the `xo_board', the clock that is specified as the `xo' clock in the
DT file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
Changes since v1:
- Added a note regarding xo -> xo_board change (Bjorn)
---
drivers/clk/qcom/a53-pll.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c
index 329d2c5356d8..f9c5e296dba2 100644
--- a/drivers/clk/qcom/a53-pll.c
+++ b/drivers/clk/qcom/a53-pll.c
@@ -127,7 +127,9 @@ static int qcom_a53pll_probe(struct platform_device *pdev)
if (!init.name)
return -ENOMEM;
- init.parent_names = (const char *[]){ "xo" };
+ init.parent_data = &(const struct clk_parent_data){
+ .fw_name = "xo", .name = "xo_board",
+ };
init.num_parents = 1;
init.ops = &clk_pll_sr2_ops;
pll->clkr.hw.init = &init;
--
2.35.1
