The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom-msm8974-sony-xperia-rhine-amami.dtb: tcsr-mutex: 'reg' is a required property
qcom-msm8974-sony-xperia-rhine-amami.dtb: tcsr-mutex: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index ada232bed2c8..6bb06eaf08fd 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1228,9 +1228,10 @@ smd-edge {
};
};
- tcsr_mutex_block: syscon@fd484000 {
- compatible = "syscon";
+ tcsr_mutex: hwlock@fd484000 {
+ compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex";
reg = <0xfd484000 0x1000>;
+ #hwlock-cells = <1>;
};
tcsr_1: syscon@fd485000 {
@@ -1719,13 +1720,6 @@ reboot-mode {
};
};
- tcsr_mutex: tcsr-mutex {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_block 0 0x80>;
-
- #hwlock-cells = <1>;
- };
-
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
--
2.34.1
