[PATCH v3 8/9] PCI: qcom: Setup PHY to work in RC mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Call phy_set_mode_ext() to notify the PHY driver that the PHY is being
used in the RC mode.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 66886dc6e777..32d58282bed0 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1494,6 +1494,10 @@ static int qcom_pcie_host_init(struct dw_pcie_rp *pp)
 	if (ret)
 		return ret;
 
+	ret = phy_set_mode_ext(pcie->phy, PHY_MODE_PCIE, PHY_SUBMODE_PCIE_RC);
+	if (ret)
+		goto err_deinit;
+
 	ret = phy_power_on(pcie->phy);
 	if (ret)
 		goto err_deinit;
-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux