DT schema expects DAI node names to be "dai": qcom/sdm845-xiaomi-beryllium.dtb: dais: 'qi2s@22' does not match any of the regexes: '^dai@[0-9]+$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 2 +- arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 2 +- arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 132417e2d11e..2110a5893149 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -651,7 +651,7 @@ led@5 { /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { - qi2s@22 { + dai@22 { reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0 1 2 3>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index 0f470cf1ed1c..68e2a07a01dc 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -338,7 +338,7 @@ resin { /* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */ &q6afedai { - qi2s@22 { + dai@22 { reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index afc17e4d403f..4f6f1ce7286c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -544,8 +544,8 @@ resin { }; &q6afedai { - qi2s@22 { - reg = <22>; + dai@22 { + reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0>; }; }; -- 2.34.1