Re: [PATCH v24 1/2] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Aug 18, 2022 at 2:31 PM Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Fri, Jul 22, 2022 at 9:32 AM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
> >
> > Add nodes for the onboard USB hub on trogdor devices. Remove the
> > 'always-on' property from the hub regulator, since the regulator
> > is now managed by the onboard_usb_hub driver.
> >
> > For anyone using trogdor-based devices on Linux, it should be
> > noted that this requires "CONFIG_USB_ONBOARD_HUB=y".
> >
> > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> > Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> > Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > ---
> > This series depends on 3a6bf4a08142 ("usb: core: hub: Create platform
> > devices for onboard hubs in hub_probe()") which landed in -next [1].
> >
> > [1] https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=3a6bf4a08142826698121bef16b244dcf50a6431
> >
> > Changes in v24:
> > - renamed 'companion-hub' to 'peer-hub' according to the change
> >   in the binding
> >
> > Changes in v23:
> > - added note about enabling CONFIG_USB_ONBOARD_HUB to the commit
> >   message
> >
> > Changes in v22:
> > - none
> >
> > Changes in v21:
> > - patch dropped from onboard_usb_hub series
> >
> > Changes in v20:
> > - renamed hub labels to 'usb_hub_2/3_x'
> > - added comment for 'regulator-boot-on' of 'pp3300_hub'
> > - added 'Reviewed-by' tags from Stephen and Doug
> >
> > Changes in v19:
> > - none
> >
> > Changes in v18:
> > - also adjust config for pompom rev1
> >
> > Changes in v17:
> > - none
> >
> > Changes in v16:
> > - none
> >
> > Changes in v15:
> > - none
> >
> > Changes in v14:
> > - none
> >
> > Changes in v13:
> > - none
> >
> > Changes in v12:
> > - none
> >
> > Changes in v11:
> > - rebased on qcom/arm64-for-5.14 (with the rest of the series)
> >
> > Changes in v10:
> > - keep 'regulator-boot-on' property
> > - updated commit message
> >
> > Changes in v9:
> > - none
> >
> > Changes in v8:
> > - none
> >
> > Changes in v7:
> > - rebased on qcom/arm64-for-5.13 (with the rest of the series)
> >
> > Changes in v6:
> > - added 'companion-hub' entry to both USB devices
> > - added 'vdd-supply' also to hub@2
> >
> > Changes in v5:
> > - patch added to the series
> >
> >  .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 19 ++++++++----------
> >  .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 12 +++++------
> >  .../dts/qcom/sc7180-trogdor-pompom-r1.dts     | 11 ++++------
> >  .../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 19 ++++++++----------
> >  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi  | 20 ++++++++++++++++++-
> >  5 files changed, 44 insertions(+), 37 deletions(-)
>
> The driver changes have landed and stuck. They're in Linus's tree, so
> I think we're now ready to land these two patches! Hooray!
>
> FWIW: I've continued my experiment of landing changes that I'm keeping
> track of in a github tree:
>
> https://github.com/dianders/kernel-staging/commits/qcom/arm64-staging

I believe this series continues to be ready to land. Perhaps now would
be a good time for it? ;-)

-Doug



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux