Asutosh,
On Fri, 2022-09-02 at 15:41 -0700, Asutosh Das wrote:
> Preparatory changes for upcoming multi circular queue.
>
> Co-developed-by: Can Guo <quic_cang@xxxxxxxxxxx>
> Signed-off-by: Can Guo <quic_cang@xxxxxxxxxxx>
> Signed-off-by: Asutosh Das <quic_asutoshd@xxxxxxxxxxx>
> ---
> drivers/ufs/core/ufshcd.c | 99 +++++++++++++++++++++++++------------
> ----------
> 1 file changed, 53 insertions(+), 46 deletions(-)
>
>
>
> @@ -2134,14 +2135,14 @@ static void ufshcd_update_monitor(struct
> ufs_hba *hba, const struct ufshcd_lrb *
> * @task_tag: Task tag of the command
> */
You didn't change parameter name in the function description.
> static inline
> -void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
> +void ufshcd_send_command(struct ufs_hba *hba, struct ufshcd_lrb
> *lrbp)
> {
> - struct ufshcd_lrb *lrbp = &hba->lrb[task_tag];
> + int task_tag = lrbp->task_tag;
> unsigned long flags;
>
> lrbp->issue_time_stamp = ktime_get();
> lrbp->compl_time_stamp = ktime_set(0, 0);
> - ufshcd_add_command_trace(hba, task_tag, UFS_CMD_SEND);
> + ufshcd_add_command_trace(hba, lrbp, UFS_CMD_SEND);
> ufshcd_clk_scaling_start_busy(hba);
> if (unlikely(ufshcd_should_inform_monitor(hba, lrbp)))
> ufshcd_start_monitor(hba, lrbp);
> @@ -2553,9 +2554,10 @@ void ufshcd_prepare_utp_scsi_cmd_upiu(struct
> ufshcd_lrb *lrbp, u8 upiu_flags)
> /* command descriptor fields */
> ucd_req_ptr->header.dword_0 = UPIU_HEADER_DWORD(
> UPIU_TRANSACTION_COMMAND, upiu_flags,
> - lrbp->lun, lrbp->task_tag);
> + lrbp->lun, lrbp->task_tag & 0xff);
> ucd_req_ptr->header.dword_1 = UPIU_HEADER_DWORD(
> - UPIU_COMMAND_SET_TYPE_SCSI, 0, 0, 0);
> + UPIU_COMMAND_SET_TYPE_SCSI, 0, 0,
> + (lrbp->task_tag & 0xf00) << 4);
>
Are you sure here "(lrbp->task_tag & 0xf00) << 4" is correct?
this will overwrite other fields, see UPIU_HEADER_DWORD:
#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
(byte1 << 8) | (byte0))
>
>
> - ufshcd_send_command(hba, tag);
> + ufshcd_send_command(hba, lrbp);
> err = ufshcd_wait_for_dev_cmd(hba, lrbp, timeout);
> ufshcd_add_query_upiu_trace(hba, err ? UFS_QUERY_ERR :
> UFS_QUERY_COMP,
> (struct utp_upiu_req *)lrbp-
> >ucd_rsp_ptr);
> @@ -4513,6 +4515,7 @@ int ufshcd_make_hba_operational(struct ufs_hba
> *hba)
> REG_UTP_TRANSFER_REQ_LIST_BASE_L);
> ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr),
> REG_UTP_TRANSFER_REQ_LIST_BASE_H);
> +
> ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr),
> REG_UTP_TASK_REQ_LIST_BASE_L);
> ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr),
> @@ -5320,6 +5323,32 @@ static void ufshcd_release_scsi_cmd(struct
> ufs_hba *hba,
> ufshcd_clk_scaling_update_busy(hba);
> }
>
> +void ufshcd_compl_one_cqe(struct ufs_hba *hba, int task_tag)
This function does only complete one task. What does cqe stand for?
> +{
> + struct ufshcd_lrb *lrbp;
> + struct scsi_cmnd *cmd;
> +
> + lrbp = &hba->lrb[task_tag];
> + lrbp->compl_time_stamp = ktime_get();
> + cmd = lrbp->cmd;
> + if (cmd) {
> + if (unlikely(ufshcd_should_inform_monitor(hba,
> lrbp)))
> + ufshcd_update_monitor(hba, lrbp);
> + ufshcd_add_command_trace(hba, lrbp, UFS_CMD_COMP);
> + cmd->result = ufshcd_transfer_rsp_status(hba, lrbp);
> + ufshcd_release_scsi_cmd(hba, lrbp);
> + /* Do not touch lrbp after scsi done */
> + scsi_done(cmd);
> + } else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE ||
> + lrbp->command_type == UTP_CMD_TYPE_UFS_STORAGE) {
> + if (hba->dev_cmd.complete) {
> + ufshcd_add_command_trace(hba, lrbp,
> UFS_DEV_COMP);
> + complete(hba->dev_cmd.complete);
> + ufshcd_clk_scaling_update_busy(hba);
> + }
> + }
> +}
> +
Kind regards,
Bean
