Add support for Qualcomm SM6115 SoC. This includes:
- GCC
- Pinctrl
- RPM (CC+PD)
- USB
- MMC
- UFS
Signed-off-by: Iskren Chernev <iskren.chernev@xxxxxxxxx>
---
Remaining issues from make dtbs_check:
- qcom,glink-rpm -- this is still in a txt file
- rpm-requests: qcom,glink-channels -- according to txt file, it is allowed
property
- pinctrl -- the existing bindings should support both simple (single pin)
and multi-block pinctr blocks (this commit contains multi-block only).
However it doesn't work. This block needs to be revisited:
#PIN CONFIGURATION NODES
patternProperties:
'-state$':
oneOf:
- $ref: "#/$defs/qcom-sm6115-tlmm-state"
- patternProperties:
".*":
$ref: "#/$defs/qcom-sm6115-tlmm-state"
- ufs phy: binding complains about missing #clock and #phy -cells. The
outer binding is never used as a clock or a phy (via reference), and
I don't think it will be. Also none of the other ufs phy dts files has
those props
- usb: according to schema, there should be 4 interrupts, but some have
2 (like sm6115), and some have none. I see no such interrupts on DS. Are
they defined elsewhere?
arch/arm64/boot/dts/qcom/sm6115.dtsi | 904 +++++++++++++++++++++++++++
1 file changed, 904 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
new file mode 100644
index 000000000000..a1a5dc24e4db
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -0,0 +1,904 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@xxxxxxxxx>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sm6115.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "sleep_clk";
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x0>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x1>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x2>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x3>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1638>;
+ dynamic-power-coefficient = <282>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x101>;
+ capacity-dmips-mhz = <1638>;
+ dynamic-power-coefficient = <282>;
+ enable-method = "psci";
+ next-level-cache = <&L2_1>;
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x102>;
+ capacity-dmips-mhz = <1638>;
+ dynamic-power-coefficient = <282>;
+ enable-method = "psci";
+ next-level-cache = <&L2_1>;
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x103>;
+ capacity-dmips-mhz = <1638>;
+ dynamic-power-coefficient = <282>;
+ enable-method = "psci";
+ next-level-cache = <&L2_1>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-sm6115", "qcom,scm";
+ #reset-cells = <1>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0 0x80000000 0 0>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hyp_mem: memory@45700000 {
+ reg = <0x0 0x45700000 0x0 0x600000>;
+ no-map;
+ };
+
+ xbl_aop_mem: memory@45e00000 {
+ reg = <0x0 0x45e00000 0x0 0x140000>;
+ no-map;
+ };
+
+ sec_apps_mem: memory@45fff000 {
+ reg = <0x0 0x45fff000 0x0 0x1000>;
+ no-map;
+ };
+
+ smem_mem: memory@46000000 {
+ reg = <0x0 0x46000000 0x0 0x200000>;
+ no-map;
+ };
+
+ cdsp_sec_mem: memory@46200000 {
+ reg = <0x0 0x46200000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_modem_mem: memory@4ab00000 {
+ reg = <0x0 0x4ab00000 0x0 0x6900000>;
+ no-map;
+ };
+
+ pil_video_mem: memory@51400000 {
+ reg = <0x0 0x51400000 0x0 0x500000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@51900000 {
+ reg = <0x0 0x51900000 0x0 0x100000>;
+ no-map;
+ };
+
+ pil_cdsp_mem: memory@51a00000 {
+ reg = <0x0 0x51a00000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_adsp_mem: memory@53800000 {
+ reg = <0x0 0x53800000 0x0 0x2800000>;
+ no-map;
+ };
+
+ pil_ipa_fw_mem: memory@56100000 {
+ reg = <0x0 0x56100000 0x0 0x10000>;
+ no-map;
+ };
+
+ pil_ipa_gsi_mem: memory@56110000 {
+ reg = <0x0 0x56110000 0x0 0x5000>;
+ no-map;
+ };
+
+ pil_gpu_mem: memory@56115000 {
+ reg = <0x0 0x56115000 0x0 0x2000>;
+ no-map;
+ };
+
+ cont_splash_memory: memory@5c000000 {
+ reg = <0x0 0x5c000000 0x0 0x00f00000>;
+ no-map;
+ };
+
+ dfps_data_memory: memory@5cf00000 {
+ reg = <0x0 0x5cf00000 0x0 0x0100000>;
+ no-map;
+ };
+
+ removed_mem: memory@60000000 {
+ reg = <0x0 0x60000000 0x0 0x3900000>;
+ no-map;
+ };
+
+ secure_display_memory: memory@f3c00000 {
+ reg = <0x0 0xf3c00000 0x0 0x5c00000>;
+ no-map;
+ };
+
+ dump_mem: memory@f9800000 {
+ reg = <0x0 0xf9800000 0x0 0x800000>;
+ no-map;
+ };
+
+ adsp_mem: memory@fa000000 {
+ reg = <0x0 0xfa000000 0x0 0x800000>;
+ no-map;
+ };
+
+ qseecom_mem: memory@fa800000 {
+ reg = <0x0 0xfa800000 0x0 0x1400000>;
+ no-map;
+ };
+
+ user_contig_mem: memory@fbc00000 {
+ reg = <0x0 0xfbc00000 0x0 0x1000000>;
+ no-map;
+ };
+
+ qseecom_ta_mem: memory@fcc00000 {
+ reg = <0x0 0xfcc00000 0x0 0x1000000>;
+ no-map;
+ };
+
+ linux_cma_mem: memory@fdc00000 {
+ reg = <0x0 0xfdc00000 0x0 0x2000000>;
+ no-map;
+ };
+
+ };
+
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sm6115";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,sm6115-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_min_svs: opp1 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp2 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp4 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp5 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp7 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+
+ rpmpd_opp_turbo_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ };
+ };
+ };
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+
+ tlmm: pinctrl@500000 {
+ compatible = "qcom,sm6115-tlmm";
+ reg = <0x500000 0x400000>,
+ <0x900000 0x400000>,
+ <0xd00000 0x400000>;
+ reg-names = "west", "south", "east";
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 121>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ sdc1_state_on: sdc1-on-state {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_state_off: sdc1-off-state {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_state_on: sdc2-on-state {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sd-cd {
+ pins = "gpio88";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_state_off: sdc2-off-state {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sd-cd {
+ pins = "gpio88";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ gcc: clock-controller@1400000 {
+ compatible = "qcom,gcc-sm6115";
+ reg = <0x1400000 0x1f0000>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+ clock-names = "bi_tcxo", "sleep_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ hsusb_phy: phy@1613000 {
+ compatible = "qcom,sm6115-qusb2-phy";
+ reg = <0x1613000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ nvmem-cells = <&qusb2_hstx_trim>;
+
+ status = "disabled";
+ };
+
+ qfprom@1b40000 {
+ compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
+ reg = <0x1b40000 0x7000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qusb2_hstx_trim: hstx-trim@25b {
+ reg = <0x25b 0x1>;
+ bits = <1 4>;
+ };
+ };
+
+ spmi_bus: spmi@1c40000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x1c40000 0x1100>,
+ <0x1e00000 0x2000000>,
+ <0x3e00000 0x100000>,
+ <0x3f00000 0xa0000>,
+ <0x1c0a000 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x340000 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ rpm_msg_ram: sram@45f0000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x45f0000 0x7000>;
+ };
+
+ sdhc_1: mmc@4744000 {
+ compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x4744000 0x1000>, <0x4745000 0x1000>, <0x4748000 0x8000>;
+ reg-names = "hc", "cqhci", "ice";
+
+ interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board>,
+ <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+ clock-names = "iface", "core", "xo", "ice";
+
+ pinctrl-0 = <&sdc1_state_on>, <&sdc1_state_off>;
+ pinctrl-names = "default", "sleep";
+
+ bus-width = <8>;
+ status = "disabled";
+ };
+
+ sdhc_2: mmc@4784000 {
+ compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x04784000 0x1000>;
+ reg-names = "hc";
+
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+
+ pinctrl-0 = <&sdc2_state_on>, <&sdc2_state_off>;
+ pinctrl-names = "default", "sleep";
+
+ power-domains = <&rpmpd SM6115_VDDCX>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+ iommus = <&apps_smmu 0x00a0 0x0>;
+ resets = <&gcc GCC_SDCC2_BCR>;
+
+ bus-width = <4>;
+ qcom,dll-config = <0x0007642c>;
+ qcom,ddr-config = <0x80040868>;
+ status = "disabled";
+
+ sdhc2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+ };
+
+ ufs_mem_hc: ufs@4804000 {
+ compatible = "qcom,sm6115-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0x4804000 0x3000>, <0x4810000 0x8000>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <1>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+ iommus = <&apps_smmu 0x100 0>;
+
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "core_clk_ice",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk";
+
+ freq-table-hz = <50000000 200000000>,
+ <0 0>,
+ <0 0>,
+ <37500000 150000000>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ status = "disabled";
+ };
+
+ ufs_mem_phy: phy@4807000 {
+ compatible = "qcom,sm6115-qmp-ufs-phy";
+ reg = <0x4807000 0x1c4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_UFS_CLKREF_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+ clock-names = "ref", "ref_aux";
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+ status = "disabled";
+
+ ufs_mem_phy_lanes: phy@4807400 {
+ reg = <0x4807400 0x098>,
+ <0x4807600 0x130>,
+ <0x4807c00 0x16c>;
+ #phy-cells = <0>;
+ };
+ };
+
+ usb3: usb@4ef8800 {
+ compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
+ reg = <0x04ef8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep", "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <66666667>;
+
+ interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+ power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+ qcom,select-utmi-as-pipe-clk;
+ status = "disabled";
+
+ usb3_dwc3: usb@4e00000 {
+ compatible = "snps,dwc3";
+ reg = <0x04e00000 0xcd00>;
+ interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hsusb_phy>;
+ phy-names = "usb2-phy";
+ iommus = <&apps_smmu 0x120 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,has-lpm-erratum;
+ snps,hird-threshold = /bits/ 8 <0x10>;
+ snps,usb3_lpm_capable;
+ maximum-speed = "high-speed";
+ dr_mode = "peripheral";
+ };
+ };
+
+ apps_smmu: iommu@c600000 {
+ compatible = "qcom,sm6115-smmu-500", "arm,mmu-500";
+ reg = <0xc600000 0x80000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ apcs_glb: mailbox@f111000 {
+ compatible = "qcom,sm6115-apcs-hmss-global";
+ reg = <0xf111000 0x1000>;
+
+ #mbox-cells = <1>;
+ };
+
+ timer@f120000 {
+ compatible = "arm,armv7-timer-mem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <0xf120000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@f121000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf121000 0x1000>,
+ <0xf122000 0x1000>;
+ };
+
+ frame@f123000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf123000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f124000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf124000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f125000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf125000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f126000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf126000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f127000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf127000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f128000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf128000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ intc: interrupt-controller@f200000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&intc>;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x20000>;
+ reg = <0xf200000 0x10000>,
+ <0xf300000 0x100000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 1 0xf08>,
+ <GIC_PPI 2 0xf08>,
+ <GIC_PPI 3 0xf08>,
+ <GIC_PPI 0 0xf08>;
+ clock-frequency = <19200000>;
+ };
+};
--
2.37.2
