Re: [PATCH 14/14] arm64: dts: qcom: sm4250: Add support for oneplus-billie2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1.09.2022 18:20, Krzysztof Kozlowski wrote:
> On 01/09/2022 10:24, Iskren Chernev wrote:
>> Add initial support for OnePlus Nord N100, based on SM4250. Currently
>> working:
>> - boots
>> - usb
>> - buildin flash storage (UFS)
>> - SD card reader
>>
>> Signed-off-by: Iskren Chernev <iskren.chernev@xxxxxxxxx>
>> ---
>>  .../boot/dts/qcom/sm4250-oneplus-billie2.dts  | 240 ++++++++++++++++++
>>  1 file changed, 240 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
>> new file mode 100644
>> index 000000000000..c1cf0288aa5f
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
>> @@ -0,0 +1,240 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@xxxxxxxxx>
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "sm4250.dtsi"
>> +
>> +/ {
>> +	model = "OnePlus Nord N100";
>> +	compatible = "oneplus,billie2", "qcom,sm4250";
>> +
>> +	/* required for bootloader to select correct board */
>> +	qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
>> +	qcom,board-id = <0x1000b 0x00>;
>> +
>> +	aliases {
>> +	};
>> +
>> +	chosen {
>> +		bootargs = "earlycon=tty0 console=tty0 clk_ignore_unused pd_ignore_unused";
> 
> No bootargs. They are not suitable for wide-use.
Agreed, the problem here is probably the framebuffer dying after our clock controllers probe.
One can solve that by adding the relevant clocks/PDs under the framebuffer node like I did
in sm8[123]50 Xperia DTs.

Konrad



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux