[PATCH v2 07/11] dt-bindings: PCI: qcom-ep: Make PERST separation optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



PERST separation is an optional debug feature used to collect the crash
dump from the PCIe endpoint devices by the PCIe host when the endpoint
crashes. This feature keeps the PCIe link up by separating the PCIe IP
block from the SoC reset logic.

So remove the corresponding property "qcom,perst-regs" from the required
properties list.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
index 3d23599e5e91..b728ede3f09f 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -105,7 +105,6 @@ required:
   - reg-names
   - clocks
   - clock-names
-  - qcom,perst-regs
   - interrupts
   - interrupt-names
   - reset-gpios
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux