Re: [PATCH 4/4] power: supply: Introduce Qualcomm PMIC GLINK power supply

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 17, 2022 at 08:15:12PM -0700, Bjorn Andersson wrote:
> The PMIC GLINK service, running on a coprocessor of modern Qualcomm
> platforms, deals with battery charging and fuel gauging, as well as
> reporting status of AC and wireless power supplies.
> 
> As this is just one of the functionalities provided by the PMIC GLINK
> service, this power supply driver is implemented as an auxilirary bus
> driver, spawned by the main "pmic glink" driver when the PMIC GLINK
> service is detected.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---

> +static int qcom_battmgr_request(struct qcom_battmgr *battmgr, void *data, size_t len)
> +{
> +	unsigned long left;
> +	int ret;
> +
> +	reinit_completion(&battmgr->ack);
> +
> +	battmgr->error = 0;
> +
> +	ret = pmic_glink_send(battmgr->client, data, len);
> +	if (ret < 0)
> +		return ret;
> +
> +	left = wait_for_completion_timeout(&battmgr->ack, HZ);
> +	if (!left)
> +		return -ETIMEDOUT;
> +
> +	return battmgr->error;
> +}

> +static void qcom_battmgr_notification(struct qcom_battmgr *battmgr,
> +				      const struct qcom_battmgr_message *msg,
> +				      int len)
> +{
> +	size_t payload_len = len - sizeof(struct pmic_glink_hdr);
> +	unsigned int notification;
> +
> +	if (payload_len != sizeof(msg->notification)) {
> +		dev_warn(battmgr->dev, "ignoring notification with invalid length\n");
> +		return;
> +	}
> +
> +	notification = le32_to_cpu(msg->notification);
> +	switch (notification) {
> +	case NOTIF_BAT_INFO:
> +		battmgr->info.valid = false;
> +		fallthrough;
> +	case NOTIF_BAT_PROPERTY:
> +		power_supply_changed(battmgr->bat_psy);
> +		break;
> +	case NOTIF_USB_PROPERTY:
> +		power_supply_changed(battmgr->usb_psy);
> +		break;
> +	case NOTIF_WLS_PROPERTY:
> +		power_supply_changed(battmgr->wls_psy);
> +		break;
> +	default:
> +		dev_err(battmgr->dev, "unknown notification: %#x\n", notification);
> +		break;
> +	}
> +}

> +static void qcom_battmgr_callback(const void *data, size_t len, void *priv)
> +{
> +	const struct pmic_glink_hdr *hdr = data;
> +	struct qcom_battmgr *battmgr = priv;
> +	unsigned int opcode = le32_to_cpu(hdr->opcode);
> +
> +	if (opcode == BATTMGR_NOTIFICATION)
> +		qcom_battmgr_notification(battmgr, data, len);
> +	else if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
> +		qcom_battmgr_sc8280xp_callback(battmgr, data, len);
> +	else
> +		qcom_battmgr_sm8350_callback(battmgr, data, len);
> +}
> +
> +static void qcom_battmgr_enable_worker(struct work_struct *work)
> +{
> +	struct qcom_battmgr *battmgr = container_of(work, struct qcom_battmgr, enable_work);
> +	struct qcom_battmgr_enable_request req = {
> +		.hdr.owner = PMIC_GLINK_OWNER_BATTMGR,
> +		.hdr.type = PMIC_GLINK_NOTIFY,
> +		.hdr.opcode = BATTMGR_REQUEST_NOTIFICATION,
> +	};
> +	int ret;
> +
> +	ret = qcom_battmgr_request(battmgr, &req, sizeof(req));
> +	if (ret)
> +		dev_err(battmgr->dev, "failed to request power notifications\n");
> +}
> +
> +static void qcom_battmgr_pdr_notify(void *priv, int state)
> +{
> +	struct qcom_battmgr *battmgr = priv;
> +
> +	if (state == SERVREG_SERVICE_STATE_UP) {
> +		battmgr->service_up = true;
> +		schedule_work(&battmgr->enable_work);
> +	} else {
> +		battmgr->service_up = false;
> +	}
> +}
> +
> +static const struct of_device_id qcom_battmgr_of_variants[] = {
> +	{ .compatible = "qcom,sc8180x-pmic-glink", .data = (void *)QCOM_BATTMGR_SC8280XP },
> +	{ .compatible = "qcom,sc8280xp-pmic-glink", .data = (void *)QCOM_BATTMGR_SC8280XP },
> +	/* Unmatched devices falls back to QCOM_BATTMGR_SM8350 */
> +	{}
> +};
> +
> +static char *qcom_battmgr_battery[] = { "battery" };
> +
> +static int qcom_battmgr_probe(struct auxiliary_device *adev,
> +			      const struct auxiliary_device_id *id)
> +{
> +	struct power_supply_config psy_cfg_supply = {};
> +	struct power_supply_config psy_cfg = {};
> +	const struct of_device_id *match;
> +	struct qcom_battmgr *battmgr;
> +	struct device *dev = &adev->dev;
> +
> +	battmgr = devm_kzalloc(dev, sizeof(*battmgr), GFP_KERNEL);
> +	if (!battmgr)
> +		return -ENOMEM;
> +
> +	battmgr->dev = dev;
> +
> +	psy_cfg.drv_data = battmgr;
> +	psy_cfg.of_node = adev->dev.of_node;
> +
> +	psy_cfg_supply.drv_data = battmgr;
> +	psy_cfg_supply.of_node = adev->dev.of_node;
> +	psy_cfg_supply.supplied_to = qcom_battmgr_battery;
> +	psy_cfg_supply.num_supplicants = 1;
> +
> +	INIT_WORK(&battmgr->enable_work, qcom_battmgr_enable_worker);
> +	mutex_init(&battmgr->lock);
> +	init_completion(&battmgr->ack);
> +
> +	match = of_match_device(qcom_battmgr_of_variants, dev->parent);
> +	if (match)
> +		battmgr->variant = (unsigned long)match->data;
> +	else
> +		battmgr->variant = QCOM_BATTMGR_SM8350;
> +
> +	battmgr->client = devm_pmic_glink_register_client(dev,
> +							  PMIC_GLINK_OWNER_BATTMGR,
> +							  qcom_battmgr_callback,
> +							  qcom_battmgr_pdr_notify,
> +							  battmgr);
> +	if (IS_ERR(battmgr->client))
> +		return PTR_ERR(battmgr->client);

This is racy as you register the callbacks before registering the power
supplies below.

I've seen NULL derefs in qcom_battmgr_notification() when trying to
access the power supplies before they have been allocated due to early
notifications on both CRD and X13s. This can easily be reproduced by
adding some sleep here.

On the other hand, I guess you can't just move the callback registration
after registering the supplies as battmgr->client is needed to process
requests.

> +
> +	if (battmgr->variant == QCOM_BATTMGR_SC8280XP) {
> +		battmgr->bat_psy = devm_power_supply_register(dev, &sc8280xp_bat_psy_desc, &psy_cfg);
> +		if (IS_ERR(battmgr->bat_psy))
> +			return dev_err_probe(dev, PTR_ERR(battmgr->bat_psy),
> +					     "failed to register battery power supply\n");
> +
> +		battmgr->ac_psy = devm_power_supply_register(dev, &sc8280xp_ac_psy_desc, &psy_cfg_supply);
> +		if (IS_ERR(battmgr->ac_psy))
> +			return dev_err_probe(dev, PTR_ERR(battmgr->ac_psy),
> +					     "failed to register AC power supply\n");
> +
> +		battmgr->usb_psy = devm_power_supply_register(dev, &sc8280xp_usb_psy_desc, &psy_cfg_supply);
> +		if (IS_ERR(battmgr->usb_psy))
> +			return dev_err_probe(dev, PTR_ERR(battmgr->usb_psy),
> +					     "failed to register USB power supply\n");
> +
> +		battmgr->wls_psy = devm_power_supply_register(dev, &sc8280xp_wls_psy_desc, &psy_cfg_supply);
> +		if (IS_ERR(battmgr->wls_psy))
> +			return dev_err_probe(dev, PTR_ERR(battmgr->wls_psy),
> +					     "failed to register wireless charing power supply\n");
> +	} else {
> +		battmgr->bat_psy = devm_power_supply_register(dev, &sm8350_bat_psy_desc, &psy_cfg);
> +		if (IS_ERR(battmgr->bat_psy))
> +			return dev_err_probe(dev, PTR_ERR(battmgr->bat_psy),
> +					     "failed to register battery power supply\n");
> +
> +		battmgr->usb_psy = devm_power_supply_register(dev, &sm8350_usb_psy_desc, &psy_cfg_supply);
> +		if (IS_ERR(battmgr->usb_psy))
> +			return dev_err_probe(dev, PTR_ERR(battmgr->usb_psy),
> +					     "failed to register USB power supply\n");
> +
> +		battmgr->wls_psy = devm_power_supply_register(dev, &sm8350_wls_psy_desc, &psy_cfg_supply);
> +		if (IS_ERR(battmgr->wls_psy))
> +			return dev_err_probe(dev, PTR_ERR(battmgr->wls_psy),
> +					     "failed to register wireless charing power supply\n");
> +	}
> +
> +	dev_set_drvdata(dev, battmgr);

You never use the driver data so you shouldn't set it.

> +
> +	return 0;
> +}

Johan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux