On 25.08.2022 18:42, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
>
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
>
> Let's re-enable the old functionality by fixing the dts.
>
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
>
> Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Konrad
>
> .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 30 +++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 16c6e4d920bb..0c2534b4ec24 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -80,6 +80,9 @@ vreg_l3b: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> regulator-boot-on;
> };
>
> @@ -89,6 +92,9 @@ vreg_l4b: ldo4 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l6b: ldo6 {
> @@ -97,6 +103,9 @@ vreg_l6b: ldo6 {
> regulator-max-microvolt = <880000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> regulator-boot-on;
> regulator-always-on; // FIXME: VDD_A_EDP_0_0P9
> };
> @@ -112,6 +121,9 @@ vreg_l1c: ldo1 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l12c: ldo12 {
> @@ -120,6 +132,9 @@ vreg_l12c: ldo12 {
> regulator-max-microvolt = <1800000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l13c: ldo13 {
> @@ -128,6 +143,9 @@ vreg_l13c: ldo13 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
>
> @@ -143,6 +161,9 @@ vreg_l3d: ldo3 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l4d: ldo4 {
> @@ -151,6 +172,9 @@ vreg_l4d: ldo4 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l7d: ldo7 {
> @@ -159,6 +183,9 @@ vreg_l7d: ldo7 {
> regulator-max-microvolt = <3072000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
>
> vreg_l9d: ldo9 {
> @@ -167,6 +194,9 @@ vreg_l9d: ldo9 {
> regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> regulator-allow-set-load;
> + regulator-allowed-modes =
> + <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> };
> };
> };
