On Thu, Aug 25, 2022 at 03:16:58PM -0700, Matthias Kaehlcke wrote:
> On Wed, Aug 24, 2022 at 10:47:44AM +0200, Johan Hovold wrote:
> > On Tue, Aug 23, 2022 at 09:42:53AM -0700, Matthias Kaehlcke wrote:
> > > On Tue, Aug 23, 2022 at 01:16:36PM +0200, Johan Hovold wrote:
> > > > On Mon, Aug 22, 2022 at 11:53:11AM -0700, Matthias Kaehlcke wrote:
> > > > > Set GENPD_FLAG_ACTIVE_WAKEUP for the USB GDSC power domains of SC7280.
> > > > >
> > > > > Suggested-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> > > > > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> > > > > ---
> > > > >
> > > > > drivers/clk/qcom/gcc-sc7280.c | 2 ++
> > > > > 1 file changed, 2 insertions(+)
> > > > >
> > > > > diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
> > > > > index 7ff64d4d5920..4ff855269467 100644
> > > > > --- a/drivers/clk/qcom/gcc-sc7280.c
> > > > > +++ b/drivers/clk/qcom/gcc-sc7280.c
> > > > > @@ -3125,6 +3125,7 @@ static struct gdsc gcc_usb30_prim_gdsc = {
> > > > > .gdscr = 0xf004,
> > > > > .pd = {
> > > > > .name = "gcc_usb30_prim_gdsc",
> > > > > + .flags = GENPD_FLAG_ACTIVE_WAKEUP,
> > > >
> > > > Have you verified that the power-domain doesn't need to remain on also
> > > > when USB isn't used for wakeup?
> > >
> > > So far I haven't observed issues with this on sc7180 and sc7280 when USB
> > > wakeup is disabled.
> >
> > Ok, good.
> >
> > I would have assumed that it needed to stay always-on before the
> > s/device_can_wakeup/device_may_wakeup/ change as before that the PHYs
> > would be left on regardless of the (sysfs) wakeup setting.
>
> That make sense, not sure why GENPD_FLAG_ACTIVE_WAKEUP works with wakeup
> disabled.
>
> In any case setting the genpd flags directly in the gdsc descriptor doesn't
> seem to be the right thing to do. With GENPD_FLAG_ALWAYS_ON my sc7280 system
> stalls at boot. It boots when ALWAYS_ON is set in the gdsc flags, which ends
> up setting GENPD_FLAG_ALWAYS_ON of the genpd. I'll send a new version of this
> series which sets the correct flag.
Yes, GENPD_FLAG_ALWAYS_ON needs to be set via the gdsc ALWAYS_ON flag as
genpd expects the PD to be on when registered or else it silently errors
out...
https://lore.kernel.org/all/20220805121250.10347-3-johan+linaro@xxxxxxxxxx/
> > > > This is the case for sc8280xp and indicates that there are further
> > > > missing pieces here (at least for that platform).
> > >
> > > What are you observing on sc8280xp when wakeup is disabled?
> >
> > The wakeup setting doesn't seem to have anything to do with the genpd
> > issues on sc8280xp and the controller doesn't resume properly regardless
> > of whether the PHYs have been disabled or not during suspend unless the
> > PD is left on.
>
> I'm essentially seeing the same. USB is hosed after resume unless the PD
> is left on.
Thanks for confirming.
> On Chrome OS we currently work around that with a version of commit
> d9be8d5c5b03 ("usb: dwc3: qcom: Keep power domain on to retain controller
> status") which was reverted upstream. I'm not sure whether USB worked after
> resume before we enabled wakeup support. I would have sworn it did, but we
> landed an old version of the wakeup patches a long time ago, so my
> memory might be failing me.
>
> I wonder what the status on other QC platforms is, from a quick grep it
> seems only msm8953 sets the USB gdsc to ALWAYS_ON.
Yes, this is likely needed on other platforms as well.
Johan
