Fix the DMIC no sound issue of villager-r1 by using "PP1800_L2C" as the
DMIC power source to match the hardware schematic.
This patch:
1. set vdd-micb-supply to PP1800_L2C as the MIC Bias voltage regulator.
2. In audio-routing, set VA DMIC01~VA DMIC03 to use the vdd-micb-supply
setting.
Co-developed-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Signed-off-by: Judy Hsiao <judyhsiao@xxxxxxxxxxxx>
---
Changes since V3:
-- Update the commit message and fix extra blank line.
Changes since V2:
-- Update the commit message.
Changes since V1:
-- Update the commit message.
This patch depends on:
arm64: dts: qcom: sc7280: Add herobrine-villager-r1. [1]
[1] https://patchwork.kernel.org/patch/12929106
.../dts/qcom/sc7280-herobrine-villager-r1.dts | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts
index c03b3ae4de50..fd202a8f6a33 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts
@@ -12,3 +12,30 @@ / {
model = "Google Villager (rev1+)";
compatible = "google,villager", "qcom,sc7280";
};
+
+&lpass_va_macro {
+ vdd-micb-supply = <&pp1800_l2c>;
+};
+
+&sound {
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "vdd-micb",
+ "VA DMIC1", "vdd-micb",
+ "VA DMIC2", "vdd-micb",
+ "VA DMIC3", "vdd-micb",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+};
--
2.37.2.672.g94769d06f0-goog
