Re: [PATCH v4 02/10] dt-bindings: display/msm: move qcom,sdm845-mdss schema to mdss.yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 25/08/2022 12:50, Dmitry Baryshkov wrote:
> Move schema for qcom,sdm845-mdss from dpu-sdm845.yaml to mdss.yaml so
> that the dpu file describes only the DPU schema.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  .../bindings/display/msm/dpu-sdm845.yaml      | 135 +++------
>  .../devicetree/bindings/display/msm/mdss.yaml | 265 ++++++++++++++----

I still don't think this is better approach than what I proposed - to
have common MDSS schema used by several device-specific schemas (e.g.
sdm845-mdss.yaml or existing dpu-sdm845.yaml).

It's not only difficulty to review the patch but also to understand the
binding which grows huge.


>  2 files changed, 239 insertions(+), 161 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
> index 2bb8896beffc..2074e954372f 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
> @@ -10,139 +10,74 @@ maintainers:
>    - Krishna Manikandan <quic_mkrishn@xxxxxxxxxxx>
>  
>  description: |
> -  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
> -  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
> -  bindings of MDSS and DPU are mentioned for SDM845 target.
> +  Device tree bindings for the DPU display controller for SDM845 target.
>  
>  properties:
>    compatible:
>      items:
> -      - const: qcom,sdm845-mdss
> +      - const: qcom,sdm845-dpu
>  
>    reg:
> -    maxItems: 1
> +    items:
> +      - description: Address offset and size for mdp register set
> +      - description: Address offset and size for vbif register set
>  
>    reg-names:
> -    const: mdss
> -
> -  power-domains:
> -    maxItems: 1
> +    items:
> +      - const: mdp
> +      - const: vbif
>  
>    clocks:
>      items:
> -      - description: Display AHB clock from gcc
> +      - description: Display ahb clock
> +      - description: Display axi clock
>        - description: Display core clock
> +      - description: Display vsync clock
>  
>    clock-names:
>      items:
>        - const: iface
> +      - const: bus
>        - const: core
> +      - const: vsync
>  
>    interrupts:
>      maxItems: 1
>  
> -  interrupt-controller: true
> -
> -  "#address-cells": true
> -
> -  "#size-cells": true
> -
> -  "#interrupt-cells":
> -    const: 1
> -
> -  iommus:
> -    items:
> -      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
> -      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
> -
> -  ranges: true
> -
> -  resets:
> -    items:
> -      - description: MDSS_CORE reset
> +  power-domains:
> +    maxItems: 1
>  
> -patternProperties:
> -  "^display-controller@[0-9a-f]+$":
> -    type: object
> -    description: Node containing the properties of DPU.
> +  operating-points-v2: true
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +    description: |
> +      Contains the list of output ports from DPU device. These ports
> +      connect to interfaces that are external to the DPU hardware,
> +      such as DSI, DP etc. Each output port contains an endpoint that
> +      describes how it is connected to an external interface.
>  
>      properties:
> -      compatible:
> -        items:
> -          - const: qcom,sdm845-dpu
> -
> -      reg:
> -        items:
> -          - description: Address offset and size for mdp register set
> -          - description: Address offset and size for vbif register set
> -
> -      reg-names:
> -        items:
> -          - const: mdp
> -          - const: vbif
> -
> -      clocks:
> -        items:
> -          - description: Display ahb clock
> -          - description: Display axi clock
> -          - description: Display core clock
> -          - description: Display vsync clock
> -
> -      clock-names:
> -        items:
> -          - const: iface
> -          - const: bus
> -          - const: core
> -          - const: vsync
> -
> -      interrupts:
> -        maxItems: 1
> -
> -      power-domains:
> -        maxItems: 1
> -
> -      operating-points-v2: true
> -      ports:
> -        $ref: /schemas/graph.yaml#/properties/ports
> -        description: |
> -          Contains the list of output ports from DPU device. These ports
> -          connect to interfaces that are external to the DPU hardware,
> -          such as DSI, DP etc. Each output port contains an endpoint that
> -          describes how it is connected to an external interface.
> -
> -        properties:
> -          port@0:
> -            $ref: /schemas/graph.yaml#/properties/port
> -            description: DPU_INTF1 (DSI1)
> -
> -          port@1:
> -            $ref: /schemas/graph.yaml#/properties/port
> -            description: DPU_INTF2 (DSI2)
> -
> -        required:
> -          - port@0
> -          - port@1
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: DPU_INTF1 (DSI1)
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: DPU_INTF2 (DSI2)
>  
>      required:
> -      - compatible
> -      - reg
> -      - reg-names
> -      - clocks
> -      - interrupts
> -      - power-domains
> -      - operating-points-v2
> -      - ports
> +      - port@0
> +      - port@1
>  
>  required:
>    - compatible
>    - reg
>    - reg-names
> -  - power-domains
>    - clocks
>    - interrupts
> -  - interrupt-controller
> -  - iommus
> -  - ranges
> +  - power-domains
> +  - operating-points-v2
> +  - ports
>  
>  additionalProperties: false
>  
> diff --git a/Documentation/devicetree/bindings/display/msm/mdss.yaml b/Documentation/devicetree/bindings/display/msm/mdss.yaml
> index afc48d2b02f1..ef4709d87004 100644
> --- a/Documentation/devicetree/bindings/display/msm/mdss.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/mdss.yaml
> @@ -18,17 +18,15 @@ properties:
>    compatible:
>      enum:
>        - qcom,mdss
> +      - qcom,sdm845-mdss
>  
>    reg:
> -    minItems: 2
> +    minItems: 1
>      maxItems: 3
>  
>    reg-names:
> -    minItems: 2
> -    items:
> -      - const: mdss_phys
> -      - const: vbif_phys
> -      - const: vbif_nrt_phys
> +    minItems: 1
> +    maxItems: 3
>  
>    interrupts:
>      maxItems: 1
> @@ -53,10 +51,10 @@ properties:
>      maxItems: 4
>  
>    "#address-cells":
> -    const: 1
> +    enum: [1, 2]
>  
>    "#size-cells":
> -    const: 1
> +    enum: [1, 2]
>  
>    ranges:
>      true
> @@ -65,29 +63,178 @@ properties:
>      items:
>        - description: MDSS_CORE reset
>  
> -oneOf:
> -  - properties:
> -      clocks:
> -        minItems: 3
> -        maxItems: 4
> -
> -      clock-names:
> -        minItems: 3
> -        items:
> -          - const: iface
> -          - const: bus
> -          - const: vsync
> -          - const: core
> -  - properties:
> -      clocks:
> -        minItems: 1
> -        maxItems: 2
> -
> -      clock-names:
> -        minItems: 1
> -        items:
> -          - const: iface
> -          - const: core
> +  interconnects:
> +    minItems: 2
> +    items:
> +      - description: MDP port 0
> +      - description: MDP port 1
> +      - description: Rotator
> +
> +  interconnect-names:
> +    minItems: 2
> +    items:
> +      - const: mdp0-mem
> +      - const: mdp1-mem
> +      - const: rotator-mem

This was not allowed for qcom,mdss. Same with iommus.

Best regards,
Krzysztof



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux