Add support for IPQ8074 since it uses the same PLL setup, however it uses
slightly different Alpha PLL config.
Alpha PLL config was obtained by dumping PLL registers from a running
device.
Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
Changes in v2:
* Drop hardcoded compatible check for IPQ6018 to do the PLL config and
utilize match data provided by previous commit
* Add IPQ8074 Alpha PLL config using match data
* Update commit description to reflect changes
---
drivers/clk/qcom/apss-ipq-pll.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index a4016f3854c2..a5aea27eb867 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -49,6 +49,18 @@ static const struct alpha_pll_config ipq6018_pll_config = {
.test_ctl_hi_val = 0x4000,
};
+static const struct alpha_pll_config ipq8074_pll_config = {
+ .l = 0x48,
+ .config_ctl_val = 0x200d4828,
+ .config_ctl_hi_val = 0x6,
+ .early_output_mask = BIT(3),
+ .aux2_output_mask = BIT(2),
+ .aux_output_mask = BIT(1),
+ .main_output_mask = BIT(0),
+ .test_ctl_val = 0x1c000000,
+ .test_ctl_hi_val = 0x4000,
+};
+
static const struct regmap_config ipq_pll_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
@@ -89,6 +101,7 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
static const struct of_device_id apss_ipq_pll_match_table[] = {
{ .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config },
+ { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_config },
{ }
};
MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
--
2.37.2
