Re: [RFT PATCH v2 12/14] arm64: dts: qcom: qcs404: switch TCSR mutex to MMIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 17.08.2022 15:03, Krzysztof Kozlowski wrote:
> The TCSR mutex bindings allow device to be described only with address
> space (so it uses MMIO, not syscon regmap).  This seems reasonable as
> TCSR mutex is actually a dedicated IO address space and it also fixes DT
> schema checks:
> 
>   qcom/qcs404-evb-4000.dtb: hwlock: 'reg' is a required property
>   qcom/qcs404-evb-4000.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Not tested on a device, but looks good to the eye:
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/qcs404.dtsi | 11 +++--------
>  1 file changed, 3 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index 9ab990061522..3a94eb2cc448 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -295,12 +295,6 @@ smem {
>  		hwlocks = <&tcsr_mutex 3>;
>  	};
>  
> -	tcsr_mutex: hwlock {
> -		compatible = "qcom,tcsr-mutex";
> -		syscon = <&tcsr_mutex_regs 0 0x1000>;
> -		#hwlock-cells = <1>;
> -	};
> -
>  	soc: soc@0 {
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> @@ -726,9 +720,10 @@ gcc: clock-controller@1800000 {
>  			assigned-clock-rates = <19200000>;
>  		};
>  
> -		tcsr_mutex_regs: syscon@1905000 {
> -			compatible = "syscon";
> +		tcsr_mutex: hwlock@1905000 {
> +			compatible = "qcom,tcsr-mutex";
>  			reg = <0x01905000 0x20000>;
> +			#hwlock-cells = <1>;
>  		};
>  
>  		tcsr: syscon@1937000 {



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux