Re: [PATCH v4 1/7] dt-bindings: remoteproc: qcom: Add SC7280 ADSP support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 12, 2022 at 06:17:40PM +0530, Srinivasa Rao Mandadapu wrote:
> Add ADSP PIL loading support for SC7280 SoCs.
> 
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
> ---
>  .../bindings/remoteproc/qcom,sc7280-adsp-pil.yaml  | 189 +++++++++++++++++++++
>  1 file changed, 189 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
> new file mode 100644
> index 0000000..e656cc8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
> @@ -0,0 +1,189 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-adsp-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SC7280 ADSP Peripheral Image Loader
> +
> +maintainers:
> +  - Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
> +
> +description:
> +  This document defines the binding for a component that loads and boots firmware
> +  on the Qualcomm Technology Inc. ADSP.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,sc7280-adsp-pil
> +
> +  reg:
> +    minItems: 1
> +    items:
> +      - description: qdsp6ss register
> +      - description: efuse q6ss register
> +
> +  interrupts:
> +    items:
> +      - description: Watchdog interrupt
> +      - description: Fatal interrupt
> +      - description: Ready interrupt
> +      - description: Handover interrupt
> +      - description: Stop acknowledge interrupt
> +      - description: Shutdown acknowledge interrupt
> +
> +  interrupt-names:
> +    items:
> +      - const: wdog
> +      - const: fatal
> +      - const: ready
> +      - const: handover
> +      - const: stop-ack
> +      - const: shutdown-ack
> +
> +  clocks:
> +    items:
> +      - description: XO clock
> +      - description: GCC CFG NOC LPASS clock
> +      - description: LPASS AHBS AON clock
> +      - description: LPASS AHBM AON clock
> +      - description: QDSP XO clock
> +      - description: Q6SP6SS SLEEP clock
> +      - description: Q6SP6SS CORE clock
> +
> +  clock-names:
> +    items:
> +      - const: xo
> +      - const: gcc_cfg_noc_lpass
> +      - const: lpass_ahbs_aon_cbcr
> +      - const: lpass_ahbm_aon_cbcr
> +      - const: qdsp6ss_xo
> +      - const: qdsp6ss_sleep
> +      - const: qdsp6ss_core
> +
> +  power-domains:
> +    items:
> +      - description: LCX power domain
> +
> +  resets:
> +    items:
> +      - description: PDC AUDIO SYNC RESET
> +      - description: CC LPASS restart
> +
> +  reset-names:
> +    items:
> +      - const: pdc_sync
> +      - const: cc_lpass
> +
> +  memory-region:
> +    maxItems: 1
> +    description: Reference to the reserved-memory for the Hexagon core
> +
> +  qcom,adsp-memory-regions:
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +    description:
> +      Each entry consists of 4 integers and represents the
> +      list of memory regions accessed by ADSP firmware.
> +    items:
> +      items:
> +        - description: |
> +            "iova reg" indicates the address of virtual memory region.
> +        - description: |
> +            "physical reg" indicates the address of phyical memory region.
> +        - description: |
> +            "size" indicates the offset memory region.
> +        - description: |
> +            "access level" indicates the read, read and write access levels.
> +          minimum: 0
> +          maximum: 1
> +
> +  qcom,halt-regs:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Phandle reference to a syscon representing TCSR followed by the
> +      three offsets within syscon for q6, modem and nc halt registers.

items: 
  - items:
      - description: phandle to TCSR
      - description: offset to q6 halt registers
      - ...

> +
> +  qcom,smem-states:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: States used by the AP to signal the Hexagon core
> +    items:
> +      - description: Stop the modem
> +
> +  qcom,smem-state-names:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: The names of the state bits used for SMP2P output
> +    items:
> +      - const: stop
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +  - reset-names
> +  - qcom,halt-regs
> +  - memory-region
> +  - qcom,smem-states
> +  - qcom,smem-state-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
> +    #include <dt-bindings/clock/qcom,lpass-sc7280.h>
> +    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> +    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +    remoteproc@3000000 {
> +        compatible = "qcom,sc7280-adsp-pil";
> +        reg = <0x03000000 0x5000>,
> +              <0x355B000 0x10>;
> +
> +        interrupts-extended = <&pdc 162 IRQ_TYPE_EDGE_RISING>,
> +                <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +                <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +                <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +                <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> +                <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> +
> +        interrupt-names = "wdog", "fatal", "ready",
> +                "handover", "stop-ack", "shutdown-ack";
> +
> +        clocks = <&rpmhcc RPMH_CXO_CLK>,
> +                 <&gcc GCC_CFG_NOC_LPASS_CLK>,
> +                 <&lpasscc LPASS_Q6SS_AHBM_CLK>,
> +                 <&lpasscc LPASS_Q6SS_AHBS_CLK>,
> +                 <&lpasscc LPASS_QDSP6SS_XO_CLK>,
> +                 <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
> +                 <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
> +        clock-names = "xo", "gcc_cfg_noc_lpass",
> +                "lpass_ahbs_aon_cbcr",
> +                "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
> +                "qdsp6ss_sleep", "qdsp6ss_core";
> +
> +        power-domains = <&rpmhpd SC7280_LCX>;
> +
> +        resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> +                 <&aoss_reset AOSS_CC_LPASS_RESTART>;
> +        reset-names = "pdc_sync", "cc_lpass";
> +
> +        qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
> +
> +        memory-region = <&adsp_mem>;
> +
> +        qcom,smem-states = <&adsp_smp2p_out 0>;
> +        qcom,smem-state-names = "stop";
> +
> +        qcom,adsp-memory-regions = <0x00100000 0x00100000 0x4000 0>,
> +                                   <0x00113000 0x00113000 0x1000 0>,
> +                                   <0x00117000 0x00117000 0x2000 1>;
> +    };
> -- 
> 2.7.4
> 
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux