Reading temperature from this sensor fails with 'Invalid argument'. Looking at old vendor dts [1], its hw_id should be 3 instead of 4. Change this hw_id accordingly. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/master/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L511 Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939") Signed-off-by: Vincent Knecht <vincent.knecht@xxxxxxxxxx> --- Fixes reading GPU temperature on msm8939 idol3 with current WIP dtsi --- drivers/thermal/qcom/tsens-v0_1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c index f136cb350238..327f37202c69 100644 --- a/drivers/thermal/qcom/tsens-v0_1.c +++ b/drivers/thermal/qcom/tsens-v0_1.c @@ -604,7 +604,7 @@ static const struct tsens_ops ops_8939 = { struct tsens_plat_data data_8939 = { .num_sensors = 10, .ops = &ops_8939, - .hw_ids = (unsigned int []){ 0, 1, 2, 4, 5, 6, 7, 8, 9, 10 }, + .hw_ids = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, 10 }, .feat = &tsens_v0_1_feat, .fields = tsens_v0_1_regfields, -- 2.37.1
