The LLCC EDAC register offsets varies between each SoCs. Until now, the
EDAC driver used the hardcoded register offsets. But this caused crash
on SM8450 SoC where the register offsets has been changed.
So to avoid this crash and also to make it easy to accommodate changes for
new SoCs, let's pass the SoC specific register offsets to the EDAC driver.
Currently, two set of offsets are used. One is SM8450 specific and another
one is common to all SoCs.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
drivers/soc/qcom/llcc-qcom.c | 64 ++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index eecafeded56f..1aedbbb8e96f 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -104,6 +104,7 @@ struct qcom_llcc_config {
int size;
bool need_llcc_cfg;
const u32 *reg_offset;
+ const struct llcc_edac_reg *edac_reg;
};
enum llcc_reg_offset {
@@ -252,6 +253,60 @@ static const struct llcc_slice_config sm8450_data[] = {
{LLCC_AENPU, 8, 2048, 1, 1, 0xFFFF, 0x0, 0, 0, 0, 0, 0, 0, 0 },
};
+static const struct llcc_edac_reg common_edac_reg = {
+ .trp_ecc_error_status0 = 0x20344,
+ .trp_ecc_error_status1 = 0x20348,
+ .trp_ecc_sb_err_syn0 = 0x2304c,
+ .trp_ecc_db_err_syn0 = 0x20370,
+ .trp_ecc_error_cntr_clear = 0x20440,
+ .trp_interrupt_0_status = 0x20480,
+ .trp_interrupt_0_clear = 0x20484,
+ .trp_interrupt_0_enable = 0x20488,
+
+ /* LLCC Common registers */
+ .cmn_status0 = 0x3000c,
+ .cmn_interrupt_0_enable = 0x3001c,
+ .cmn_interrupt_2_enable = 0x3003c,
+
+ /* LLCC DRP registers */
+ .drp_ecc_error_cfg = 0x40000,
+ .drp_ecc_error_cntr_clear = 0x40004,
+ .drp_interrupt_status = 0x41000,
+ .drp_interrupt_clear = 0x41008,
+ .drp_interrupt_enable = 0x4100c,
+ .drp_ecc_error_status0 = 0x42044,
+ .drp_ecc_error_status1 = 0x42048,
+ .drp_ecc_sb_err_syn0 = 0x4204c,
+ .drp_ecc_db_err_syn0 = 0x42070,
+};
+
+static const struct llcc_edac_reg sm8450_edac_reg = {
+ .trp_ecc_error_status0 = 0x20344,
+ .trp_ecc_error_status1 = 0x20348,
+ .trp_ecc_sb_err_syn0 = 0x2034c,
+ .trp_ecc_db_err_syn0 = 0x20370,
+ .trp_ecc_error_cntr_clear = 0x20440,
+ .trp_interrupt_0_status = 0x20480,
+ .trp_interrupt_0_clear = 0x20484,
+ .trp_interrupt_0_enable = 0x20488,
+
+ /* LLCC Common registers */
+ .cmn_status0 = 0x3400c,
+ .cmn_interrupt_0_enable = 0x3401c,
+ .cmn_interrupt_2_enable = 0x3403c,
+
+ /* LLCC DRP registers */
+ .drp_ecc_error_cfg = 0x50000,
+ .drp_ecc_error_cntr_clear = 0x50004,
+ .drp_interrupt_status = 0x50020,
+ .drp_interrupt_clear = 0x50028,
+ .drp_interrupt_enable = 0x5002c,
+ .drp_ecc_error_status0 = 0x520f4,
+ .drp_ecc_error_status1 = 0x520f8,
+ .drp_ecc_sb_err_syn0 = 0x520fc,
+ .drp_ecc_db_err_syn0 = 0x52120,
+};
+
static const u32 llcc_v1_2_reg_offset[] = {
[LLCC_COMMON_HW_INFO] = 0x00030000,
[LLCC_COMMON_STATUS0] = 0x0003000c,
@@ -267,6 +322,7 @@ static const struct qcom_llcc_config sc7180_cfg = {
.size = ARRAY_SIZE(sc7180_data),
.need_llcc_cfg = true,
.reg_offset = llcc_v1_2_reg_offset,
+ .edac_reg = &common_edac_reg,
};
static const struct qcom_llcc_config sc7280_cfg = {
@@ -274,6 +330,7 @@ static const struct qcom_llcc_config sc7280_cfg = {
.size = ARRAY_SIZE(sc7280_data),
.need_llcc_cfg = true,
.reg_offset = llcc_v1_2_reg_offset,
+ .edac_reg = &common_edac_reg,
};
static const struct qcom_llcc_config sdm845_cfg = {
@@ -281,6 +338,7 @@ static const struct qcom_llcc_config sdm845_cfg = {
.size = ARRAY_SIZE(sdm845_data),
.need_llcc_cfg = false,
.reg_offset = llcc_v1_2_reg_offset,
+ .edac_reg = &common_edac_reg,
};
static const struct qcom_llcc_config sm6350_cfg = {
@@ -288,6 +346,7 @@ static const struct qcom_llcc_config sm6350_cfg = {
.size = ARRAY_SIZE(sm6350_data),
.need_llcc_cfg = true,
.reg_offset = llcc_v1_2_reg_offset,
+ .edac_reg = &common_edac_reg,
};
static const struct qcom_llcc_config sm8150_cfg = {
@@ -295,6 +354,7 @@ static const struct qcom_llcc_config sm8150_cfg = {
.size = ARRAY_SIZE(sm8150_data),
.need_llcc_cfg = true,
.reg_offset = llcc_v1_2_reg_offset,
+ .edac_reg = &common_edac_reg,
};
static const struct qcom_llcc_config sm8250_cfg = {
@@ -302,6 +362,7 @@ static const struct qcom_llcc_config sm8250_cfg = {
.size = ARRAY_SIZE(sm8250_data),
.need_llcc_cfg = true,
.reg_offset = llcc_v1_2_reg_offset,
+ .edac_reg = &common_edac_reg,
};
static const struct qcom_llcc_config sm8350_cfg = {
@@ -309,6 +370,7 @@ static const struct qcom_llcc_config sm8350_cfg = {
.size = ARRAY_SIZE(sm8350_data),
.need_llcc_cfg = true,
.reg_offset = llcc_v1_2_reg_offset,
+ .edac_reg = &common_edac_reg,
};
static const struct qcom_llcc_config sm8450_cfg = {
@@ -316,6 +378,7 @@ static const struct qcom_llcc_config sm8450_cfg = {
.size = ARRAY_SIZE(sm8450_data),
.need_llcc_cfg = true,
.reg_offset = llcc_v21_reg_offset,
+ .edac_reg = &sm8450_edac_reg,
};
static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
@@ -716,6 +779,7 @@ static int qcom_llcc_probe(struct platform_device *pdev)
drv_data->cfg = llcc_cfg;
drv_data->cfg_size = sz;
+ drv_data->edac_reg = cfg->edac_reg;
mutex_init(&drv_data->lock);
platform_set_drvdata(pdev, drv_data);
--
2.25.1
