Re: [PATCH v2 2/9] Revert "usb: dwc3: qcom: Keep power domain on to retain controller status"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 04, 2022 at 05:09:54PM +0200, Johan Hovold wrote:
> This reverts commit d9be8d5c5b032e5383ff5c404ff4155e9c705429.
> 
> Generic power-domain flags must be set before the power-domain is
> initialised and must specifically not be modified by drivers for devices
> that happen to be in the domain.
> 
> To make sure that USB power-domains are left enabled during system
> suspend when a device in the domain is in the wakeup path, the
> GENPD_FLAG_ACTIVE_WAKEUP flag should instead be set for the domain
> unconditionally when it is registered.
> 
> Note that this also avoids keeping power-domains on during suspend when
> wakeup has not been enabled (e.g. through sysfs).
> 
> For the runtime PM case, making sure that the PHYs are not suspended and
> that they are in the same domain as the controller prevents the domain
> from being suspended. If there are cases where this is not possible or
> desirable, the genpd implementation may need to be extended.
> 
> Fixes: d9be8d5c5b03 ("usb: dwc3: qcom: Keep power domain on to retain controller status")
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

Thanks,
Mani

> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 28 +++++++---------------------
>  1 file changed, 7 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index c5e482f53e9d..be2e3dd36440 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -17,7 +17,6 @@
>  #include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/phy/phy.h>
> -#include <linux/pm_domain.h>
>  #include <linux/usb/of.h>
>  #include <linux/reset.h>
>  #include <linux/iopoll.h>
> @@ -757,13 +756,12 @@ dwc3_qcom_create_urs_usb_platdev(struct device *dev)
>  
>  static int dwc3_qcom_probe(struct platform_device *pdev)
>  {
> -	struct device_node *np = pdev->dev.of_node;
> -	struct device *dev = &pdev->dev;
> -	struct dwc3_qcom *qcom;
> -	struct resource	*res, *parent_res = NULL;
> -	int ret, i;
> -	bool ignore_pipe_clk;
> -	struct generic_pm_domain *genpd;
> +	struct device_node	*np = pdev->dev.of_node;
> +	struct device		*dev = &pdev->dev;
> +	struct dwc3_qcom	*qcom;
> +	struct resource		*res, *parent_res = NULL;
> +	int			ret, i;
> +	bool			ignore_pipe_clk;
>  
>  	qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL);
>  	if (!qcom)
> @@ -772,8 +770,6 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
>  	platform_set_drvdata(pdev, qcom);
>  	qcom->dev = &pdev->dev;
>  
> -	genpd = pd_to_genpd(qcom->dev->pm_domain);
> -
>  	if (has_acpi_companion(dev)) {
>  		qcom->acpi_pdata = acpi_device_get_match_data(dev);
>  		if (!qcom->acpi_pdata) {
> @@ -881,17 +877,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto interconnect_exit;
>  
> -	if (device_can_wakeup(&qcom->dwc3->dev)) {
> -		/*
> -		 * Setting GENPD_FLAG_ALWAYS_ON flag takes care of keeping
> -		 * genpd on in both runtime suspend and system suspend cases.
> -		 */
> -		genpd->flags |= GENPD_FLAG_ALWAYS_ON;
> -		device_init_wakeup(&pdev->dev, true);
> -	} else {
> -		genpd->flags |= GENPD_FLAG_RPM_ALWAYS_ON;
> -	}
> -
> +	device_init_wakeup(&pdev->dev, 1);
>  	qcom->is_suspended = false;
>  	pm_runtime_set_active(dev);
>  	pm_runtime_enable(dev);
> -- 
> 2.35.1
> 

-- 
மணிவண்ணன் சதாசிவம்



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux