Add interface layer to abstract and handle hardware specific
functionality for executing various cpu low power modes in QCOM
chipsets.
QCOM cpus support multiple low power modes. The C-States are defined as -
* Standby
* Retention (clock gating at lower power)
* Standalone Power Collapse (Standalone PC or SPC) - The power to
the cpu is removed and core is reset upon resume.
* Power Collapse (PC) - Same as SPC, but is a cognizant of the fact
that the SoC may do deeper sleep modes.
Support Standby and SPC for the currently available QCOM SoCs.
Based on work by: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>,
Praveen Chidambaram <pchidamb@xxxxxxxxxxxxxx>, Murali Nalajala
<mnalajal@xxxxxxxxxxxxxx>
Original tree available at -
git://codeaurora.org/quic/la/kernel/msm-3.10.git
Signed-off-by: Lina Iyer <lina.iyer@xxxxxxxxxx>
---
drivers/soc/qcom/Makefile | 2 +-
drivers/soc/qcom/pm.c | 115 ++++++++++++++++++++++++++++++++++++++++++++++
include/soc/qcom/pm.h | 28 +++++++++++
3 files changed, 144 insertions(+), 1 deletion(-)
create mode 100644 drivers/soc/qcom/pm.c
create mode 100644 include/soc/qcom/pm.h
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 20b329f..19900ed 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1,4 +1,4 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
-obj-$(CONFIG_QCOM_PM) += spm.o
+obj-$(CONFIG_QCOM_PM) += spm.o pm.o
CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o
diff --git a/drivers/soc/qcom/pm.c b/drivers/soc/qcom/pm.c
new file mode 100644
index 0000000..1cb622e
--- /dev/null
+++ b/drivers/soc/qcom/pm.c
@@ -0,0 +1,115 @@
+/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+
+#include <soc/qcom/pm.h>
+#include <soc/qcom/scm.h>
+#include <soc/qcom/scm-boot.h>
+
+#define SCM_CMD_TERMINATE_PC (0x2)
+#define SCM_FLUSH_FLAG_MASK (0x3)
+#define SCM_L2_ON (0x0)
+#define SCM_L2_OFF (0x1)
+
+static int set_up_boot_address(void *entry, int cpu)
+{
+ static int flags[NR_CPUS] = {
+ SCM_FLAG_WARMBOOT_CPU0,
+ SCM_FLAG_WARMBOOT_CPU1,
+ SCM_FLAG_WARMBOOT_CPU2,
+ SCM_FLAG_WARMBOOT_CPU3,
+ };
+ static DEFINE_PER_CPU(void *, last_known_entry);
+ int ret;
+
+ if (entry == per_cpu(last_known_entry, cpu))
+ return 0;
+
+ ret = scm_set_boot_addr(virt_to_phys(entry), flags[cpu]);
+ if (!ret)
+ per_cpu(last_known_entry, cpu) = entry;
+
+ return ret;
+}
+
+static int qcom_pm_collapse(unsigned long int unused)
+{
+ int ret;
+ u32 flag;
+ int cpu = smp_processor_id();
+
+ ret = set_up_boot_address(cpu_resume, cpu);
+ if (ret) {
+ pr_err("Failed to set warm boot address for cpu %d\n", cpu);
+ return ret;
+ }
+
+ flag = SCM_L2_ON & SCM_FLUSH_FLAG_MASK;
+ scm_call_atomic1(SCM_SVC_BOOT, SCM_CMD_TERMINATE_PC, flag);
+
+ /**
+ * Returns here only if there was a pending interrupt and we did not
+ * power down as a result.
+ */
+ return 0;
+}
+
+/**
+ * qcom_cpu_pm_enter_sleep(): Enter a low power mode on current cpu
+ *
+ * @mode - sleep mode to enter
+ *
+ * The code should be called with interrupts disabled and on the core on
+ * which the low power mode is to be executed.
+ *
+ */
+static int qcom_cpu_pm_enter_sleep(enum pm_sleep_mode mode)
+{
+ int ret;
+
+ ret = qcom_spm_set_low_power_mode(mode);
+ if (ret)
+ return ret;
+
+ switch (mode) {
+ case PM_SLEEP_MODE_SPC:
+ cpu_suspend(0, qcom_pm_collapse);
+ break;
+ default:
+ case PM_SLEEP_MODE_STBY:
+ cpu_do_idle();
+ break;
+ }
+
+ return 0;
+}
+
+static struct platform_device qcom_cpuidle_device = {
+ .name = "qcom_cpuidle",
+ .id = -1,
+ .dev.platform_data = qcom_cpu_pm_enter_sleep,
+};
+
+static int __init qcom_pm_device_init(void)
+{
+ platform_device_register(&qcom_cpuidle_device);
+
+ return 0;
+}
+module_init(qcom_pm_device_init);
diff --git a/include/soc/qcom/pm.h b/include/soc/qcom/pm.h
new file mode 100644
index 0000000..e63dc1c
--- /dev/null
+++ b/include/soc/qcom/pm.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2009-2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __QCOM_PM_H
+#define __QCOM_PM_H
+
+enum pm_sleep_mode {
+ PM_SLEEP_MODE_STBY,
+ PM_SLEEP_MODE_RET,
+ PM_SLEEP_MODE_SPC,
+ PM_SLEEP_MODE_PC,
+ PM_SLEEP_MODE_NR,
+};
+
+int qcom_spm_set_low_power_mode(enum pm_sleep_mode mode);
+
+#endif /* __QCOM_PM_H */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
