The Camera Control Interface I2C controller device node belongs to
TITAN_TOP_GDSC power domain, so its children do not need to specify it
again. The OV7251 and OV8856 camera sensor bindings do not allow
power-domains.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Not tested on hardware.
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c6e2c571b452..b9304f81290a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1228,8 +1228,6 @@ camera@10 {
* both have to be enabled through the power management
* gpios.
*/
- power-domains = <&clock_camcc TITAN_TOP_GDSC>;
-
dovdd-supply = <&vreg_lvs1a_1p8>;
avdd-supply = <&cam0_avdd_2v8>;
dvdd-supply = <&cam0_dvdd_1v2>;
@@ -1273,8 +1271,6 @@ camera@60 {
*
* No 1.2V vddd-supply regulator is used.
*/
- power-domains = <&clock_camcc TITAN_TOP_GDSC>;
-
vdddo-supply = <&vreg_lvs1a_1p8>;
vdda-supply = <&cam3_avdd_2v8>;
--
2.34.1
