There are a number of drivers that follow a pattern that looks like
this:
1. Use the regulator bulk API to get a bunch of regulators.
2. Set the load on each of the regulators to use whenever the
regulators are enabled.
Let's make this easier by just allowing the drivers to pass the load
in.
As part of this change we need to move the error printing in
regulator_bulk_get() around; let's switch to the new dev_err_probe()
to simplify it.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
Changes in v2:
- ("Allow specifying an initial load w/ the bulk API") new for v2.
drivers/regulator/core.c | 20 ++++++++++++--------
include/linux/regulator/consumer.h | 12 ++++++++----
2 files changed, 20 insertions(+), 12 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 1e54a833f2cf..17c476fc8adb 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -4783,22 +4783,26 @@ int regulator_bulk_get(struct device *dev, int num_consumers,
consumers[i].consumer = regulator_get(dev,
consumers[i].supply);
if (IS_ERR(consumers[i].consumer)) {
- ret = PTR_ERR(consumers[i].consumer);
consumers[i].consumer = NULL;
+ ret = dev_err_probe(dev, PTR_ERR(consumers[i].consumer),
+ "Failed to get supply '%s'",
+ consumers[i].supply);
goto err;
}
+
+ if (consumers[i].init_load_uA > 0) {
+ ret = regulator_set_load(consumers[i].consumer,
+ consumers[i].init_load_uA);
+ if (ret) {
+ i++;
+ goto err;
+ }
+ }
}
return 0;
err:
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "Failed to get supply '%s': %pe\n",
- consumers[i].supply, ERR_PTR(ret));
- else
- dev_dbg(dev, "Failed to get supply '%s', deferring\n",
- consumers[i].supply);
-
while (--i >= 0)
regulator_put(consumers[i].consumer);
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index bbf6590a6dec..5779f4466e62 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -171,10 +171,13 @@ struct regulator;
/**
* struct regulator_bulk_data - Data used for bulk regulator operations.
*
- * @supply: The name of the supply. Initialised by the user before
- * using the bulk regulator APIs.
- * @consumer: The regulator consumer for the supply. This will be managed
- * by the bulk API.
+ * @supply: The name of the supply. Initialised by the user before
+ * using the bulk regulator APIs.
+ * @init_load_uA: After getting the regulator, regulator_set_load() will be
+ * called with this load. Initialised by the user before
+ * using the bulk regulator APIs.
+ * @consumer: The regulator consumer for the supply. This will be managed
+ * by the bulk API.
*
* The regulator APIs provide a series of regulator_bulk_() API calls as
* a convenience to consumers which require multiple supplies. This
@@ -182,6 +185,7 @@ struct regulator;
*/
struct regulator_bulk_data {
const char *supply;
+ int init_load_uA;
struct regulator *consumer;
/* private: Internal use */
--
2.37.1.359.gd136c6c3e2-goog
