Add support for SCM calls to Secure OS and the Trusted Execution
Environment (TEE/TrEE) residing in the TrustZone (TZ). This allows
communication with Secure/TZ applications, for example 'uefisecapp'
managing access to UEFI variables.
While this patch introduces only a very basic interface without the more
advanced features (such as re-entrant and blocking SCM calls and
listeners/callbacks), this is enough to talk to the aforementioned
'uefisecapp'.
Signed-off-by: Maximilian Luz <luzmaximilian@xxxxxxxxx>
---
MAINTAINERS | 7 ++
drivers/firmware/Kconfig | 4 +
drivers/firmware/Makefile | 1 +
drivers/firmware/qcom_tee.c | 213 ++++++++++++++++++++++++++++++++++++
include/linux/qcom_tee.h | 179 ++++++++++++++++++++++++++++++
5 files changed, 404 insertions(+)
create mode 100644 drivers/firmware/qcom_tee.c
create mode 100644 include/linux/qcom_tee.h
diff --git a/MAINTAINERS b/MAINTAINERS
index e9eaceeb61ef..e174747df92f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16587,6 +16587,13 @@ F: Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst
F: drivers/net/ethernet/qualcomm/rmnet/
F: include/linux/if_rmnet.h
+QUALCOMM TRUSTED EXECUTION ENVIRONMENT DRIVER
+M: Maximilian Luz <luzmaximilian@xxxxxxxxx>
+L: linux-arm-msm@xxxxxxxxxxxxxxx
+S: Maintained
+F: drivers/firmware/qcom_tee.c
+F: include/linux/qcom_tee.h
+
QUALCOMM TSENS THERMAL DRIVER
M: Amit Kucheria <amitk@xxxxxxxxxx>
M: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index b59e3041fd62..cde60a332b3c 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -226,6 +226,10 @@ config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
Say Y here to enable "download mode" by default.
+config QCOM_TEE
+ tristate
+ select QCOM_SCM
+
config SYSFB
bool
select BOOT_VESA_SUPPORT
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 28fcddcd688f..93dbc6b5a603 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o
obj-$(CONFIG_QCOM_SCM) += qcom-scm.o
qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
+obj-$(CONFIG_QCOM_TEE) += qcom_tee.o
obj-$(CONFIG_SYSFB) += sysfb.o
obj-$(CONFIG_SYSFB_SIMPLEFB) += sysfb_simplefb.o
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
diff --git a/drivers/firmware/qcom_tee.c b/drivers/firmware/qcom_tee.c
new file mode 100644
index 000000000000..7a93776a901d
--- /dev/null
+++ b/drivers/firmware/qcom_tee.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Interface driver for the Qualcomm Trusted Execution Environment (TrEE or
+ * TEE) / TrustZone secure OS (TzOS). Manages communication via Secure Channel
+ * Manager (SCM) calls.
+ *
+ * Copyright (C) 2022 Maximilian Luz <luzmaximilian@xxxxxxxxx>
+ */
+
+#include <asm/barrier.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/qcom_scm.h>
+#include <linux/string.h>
+
+#include <linux/qcom_tee.h>
+
+
+/* -- Secure-OS SCM call interface. ----------------------------------------- */
+
+static DEFINE_MUTEX(scm_call_lock);
+
+static int __qctee_os_scm_call(const struct qcom_scm_desc *desc,
+ struct qctee_os_scm_resp *res)
+{
+ struct qcom_scm_res scm_res = {};
+ int status;
+
+ status = qcom_scm_call(desc, &scm_res);
+
+ res->status = scm_res.result[0];
+ res->resp_type = scm_res.result[1];
+ res->data = scm_res.result[2];
+
+ if (status)
+ return status;
+
+ return 0;
+}
+
+/**
+ * qctee_os_scm_call() - Perform a TrEE SCM call.
+ * @dev: The (client) device to use for logging.
+ * @desc: SCM call descriptor.
+ * @res: SCM call response (output).
+ *
+ * Performs the TrEE SCM call described by @desc, returning the response in
+ * @rsp. The provided device @dev is used exclusively for logging.
+ *
+ * Return: Returns zero on success, nonzero on failure.
+ */
+int qctee_os_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qctee_os_scm_resp *res)
+{
+ int status;
+
+ /*
+ * Note: Multiple TrEE SCM calls should not be executed same time, so
+ * lock things here. This needs to be extended to callback/listener
+ * handling when support for that is implemented.
+ */
+
+ mutex_lock(&scm_call_lock);
+ status = __qctee_os_scm_call(desc, res);
+ mutex_unlock(&scm_call_lock);
+
+ dev_dbg(dev, "%s: owner=%x, svc=%x, cmd=%x, status=%lld, type=%llx, data=%llx",
+ __func__, desc->owner, desc->svc, desc->cmd, res->status,
+ res->resp_type, res->data);
+
+ if (status) {
+ dev_err(dev, "qcom_scm_call failed with error %d\n", status);
+ return status;
+ }
+
+ /*
+ * TODO: Handle incomplete and blocked calls:
+ *
+ * Incomplete and blocked calls are not supported yet. Some devices
+ * and/or commands require those, some don't. Let's warn about them
+ * prominently in case someone attempts to try these commands with a
+ * device/command combination that isn't supported yet.
+ */
+ WARN_ON(res->status == QCTEE_OS_RESULT_INCOMPLETE);
+ WARN_ON(res->status == QCTEE_OS_RESULT_BLOCKED_ON_LISTENER);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qctee_os_scm_call);
+
+
+/* -- Secure App interface. ------------------------------------------------- */
+
+/**
+ * qctee_app_get_id() - Query the app ID for a given TrEE app name.
+ * @dev: The (client) device used for logging and DMA mapping.
+ * @app_name: The name of the app.
+ * @app_id: The returned app ID.
+ *
+ * Query and return the application ID of the TrEE app identified by the given
+ * name. This returned ID is the unique identifier of the app required for
+ * subsequent communication.
+ *
+ * Return: Returns zero on success, nonzero on failure. Returns -ENOENT if the
+ * app has not been loaded or could not be found.
+ */
+int qctee_app_get_id(struct device *dev, const char *app_name, u32 *app_id)
+{
+ unsigned long name_buf_size = QCTEE_MAX_APP_NAME_SIZE;
+ unsigned long app_name_len = strlen(app_name);
+ struct qcom_scm_desc desc = {};
+ struct qctee_os_scm_resp res = {};
+ dma_addr_t name_buf_phys;
+ char *name_buf;
+ int status;
+
+ if (app_name_len >= name_buf_size)
+ return -EINVAL;
+
+ name_buf = kzalloc(name_buf_size, GFP_KERNEL);
+ if (!name_buf)
+ return -ENOMEM;
+
+ memcpy(name_buf, app_name, app_name_len);
+
+ name_buf_phys = dma_map_single(dev, name_buf, name_buf_size, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, name_buf_phys)) {
+ kfree(name_buf);
+ dev_err(dev, "failed to map dma address\n");
+ return -EFAULT;
+ }
+
+ desc.owner = QCTEE_TZ_OWNER_QSEE_OS;
+ desc.svc = QCTEE_TZ_SVC_APP_MGR;
+ desc.cmd = 0x03;
+ desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_RW, QCOM_SCM_VAL);
+ desc.args[0] = name_buf_phys;
+ desc.args[1] = app_name_len;
+
+ status = qctee_os_scm_call(dev, &desc, &res);
+ dma_unmap_single(dev, name_buf_phys, name_buf_size, DMA_TO_DEVICE);
+ kfree(name_buf);
+
+ if (status)
+ return status;
+
+ if (res.status != QCTEE_OS_RESULT_SUCCESS)
+ return -ENOENT;
+
+ *app_id = res.data;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qctee_app_get_id);
+
+/**
+ * qctee_app_send() - Send to and receive data from a given TrEE app.
+ * @dev: The (client) device used for logging.
+ * @app_id: The ID of the app to communicate with.
+ * @req: DMA region of the request sent to the app.
+ * @rsp: DMA region of the response returned by the app.
+ *
+ * Sends a request to the TrEE app identified by the given ID and read back its
+ * response. The caller must provide two DMA memory regions, one for the
+ * request and one for the response, and fill out the @req region with the
+ * respective (app-specific) request data. The TrEE app reads this and returns
+ * its response in the @rsp region.
+ *
+ * Return: Returns zero on success, nonzero on failure.
+ */
+int qctee_app_send(struct device *dev, u32 app_id, struct qctee_dma *req, struct qctee_dma *rsp)
+{
+ struct qctee_os_scm_resp res = {};
+ int status;
+
+ struct qcom_scm_desc desc = {
+ .owner = QCTEE_TZ_OWNER_TZ_APPS,
+ .svc = QCTEE_TZ_SVC_APP_ID_PLACEHOLDER,
+ .cmd = 0x01,
+ .arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_VAL,
+ QCOM_SCM_RW, QCOM_SCM_VAL,
+ QCOM_SCM_RW, QCOM_SCM_VAL),
+ .args[0] = app_id,
+ .args[1] = req->phys,
+ .args[2] = req->size,
+ .args[3] = rsp->phys,
+ .args[4] = rsp->size,
+ };
+
+ /* Make sure the request is fully written before sending it off. */
+ dma_wmb();
+
+ status = qctee_os_scm_call(dev, &desc, &res);
+
+ /* Make sure we don't attempt any reads before the SCM call is done. */
+ dma_rmb();
+
+ if (status)
+ return status;
+
+ if (res.status != QCTEE_OS_RESULT_SUCCESS)
+ return -EIO;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qctee_app_send);
+
+
+/* -- Module metadata. ------------------------------------------------------ */
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@xxxxxxxxx>");
+MODULE_DESCRIPTION("Interface for Qualcomm TrEE/TZ secure OS and secure applications");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/qcom_tee.h b/include/linux/qcom_tee.h
new file mode 100644
index 000000000000..b904d6a010d7
--- /dev/null
+++ b/include/linux/qcom_tee.h
@@ -0,0 +1,179 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Interface driver for the Qualcomm Trusted Execution Environment (TrEE/TEE) /
+ * TrustZone OS (TzOS). Manages communication via Secure Channel Manager (SCM)
+ * calls.
+ *
+ * Copyright (C) 2022 Maximilian Luz <luzmaximilian@xxxxxxxxx>
+ */
+
+#ifndef _LINUX_QCOM_TEE_H
+#define _LINUX_QCOM_TEE_H
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/qcom_scm.h>
+#include <linux/types.h>
+
+
+/* -- DMA helpers. ---------------------------------------------------------- */
+
+/* DMA requirements for TrEE SCM calls. */
+#define QCTEE_DMA_ALIGNMENT 8
+#define QCTEE_DMA_ALIGN(ptr) ALIGN(ptr, QCTEE_DMA_ALIGNMENT)
+
+/**
+ * struct qctee_dma - DMA memory region.
+ * @size: Size of the memory region, in bytes.
+ * @virt: Pointer / virtual address to the memory, accessible by the kernel.
+ * @phys: Physical address of the memory region.
+ */
+struct qctee_dma {
+ unsigned long size;
+ void *virt;
+ dma_addr_t phys;
+};
+
+/**
+ * qctee_dma_alloc() - Allocate a DMA-able memory region suitable for TrEE SCM
+ * calls.
+ * @dev: The device used for DMA memory allocation.
+ * @dma: Where to write the allocated memory addresses and size to.
+ * @size: Minimum size of the memory to be allocated.
+ * @gfp: Flags used for allocation.
+ *
+ * Allocate a DMA-able memory region suitable for interaction with TrEE
+ * services and the TzOS. The provided size is treated as the minimum required
+ * size and rounded up, if necessary. The actually allocated memory region will
+ * be stored in @dma. Allocated memory must be freed via qctee_dma_free().
+ *
+ * Return: Returns zero on success, -ENOMEM on allocation failure.
+ */
+static inline int qctee_dma_alloc(struct device *dev, struct qctee_dma *dma,
+ unsigned long size, gfp_t gfp)
+{
+ size = PAGE_ALIGN(size);
+
+ dma->virt = dma_alloc_coherent(dev, size, &dma->phys, GFP_KERNEL);
+ if (!dma->virt)
+ return -ENOMEM;
+
+ dma->size = size;
+ return 0;
+}
+
+/**
+ * qctee_dma_free() - Free a DMA memory region.
+ * @dev: The device used for allocation.
+ * @dma: The DMA region to be freed.
+ *
+ * Free a DMA region previously allocated via qctee_dma_alloc(). Note that
+ * freeing sub-regions is not supported.
+ */
+static inline void qctee_dma_free(struct device *dev, struct qctee_dma *dma)
+{
+ dma_free_coherent(dev, dma->size, dma->virt, dma->phys);
+}
+
+/**
+ * qctee_dma_realloc() - Re-allocate DMA memory region with the requested size.
+ * @dev: The device used for allocation.
+ * @dma: The region descriptor to be updated.
+ * @size: The new requested size.
+ * @gfp: Flags used for allocation.
+ *
+ * Re-allocates a DMA memory region suitable for TrEE SCM calls to fit the
+ * requested amount of bytes, if necessary. Does nothing if the provided region
+ * already has enough space to store the requested data.
+ *
+ * See qctee_dma_alloc() for details.
+ *
+ * Return: Returns zero on success, -ENOMEM on allocation failure.
+ */
+static inline int qctee_dma_realloc(struct device *dev, struct qctee_dma *dma,
+ unsigned long size, gfp_t gfp)
+{
+ if (PAGE_ALIGN(size) <= dma->size)
+ return 0;
+
+ qctee_dma_free(dev, dma);
+ return qctee_dma_alloc(dev, dma, size, gfp);
+}
+
+/**
+ * qctee_dma_aligned() - Create a aligned DMA memory sub-region suitable for
+ * TrEE SCM calls.
+ * @base: Base DMA memory region, in which the new region will reside.
+ * @out: Descriptor to store the aligned sub-region in.
+ * @offset: The offset inside base region at which to place the new sub-region.
+ *
+ * Creates an aligned DMA memory region suitable for TrEE SCM calls at or after
+ * the given offset. The size of the sub-region will be set to the remaining
+ * size in the base region after alignment, i.e. the end of the sub-region will
+ * be equal the end of the base region.
+ *
+ * Return: Returns zero on success or -EINVAL if the new aligned memory address
+ * would point outside the base region.
+ */
+static inline int qctee_dma_aligned(const struct qctee_dma *base, struct qctee_dma *out,
+ unsigned long offset)
+{
+ void *aligned = (void *)QCTEE_DMA_ALIGN((uintptr_t)base->virt + offset);
+
+ if (aligned - base->virt > base->size)
+ return -EINVAL;
+
+ out->virt = aligned;
+ out->phys = base->phys + (out->virt - base->virt);
+ out->size = base->size - (out->virt - base->virt);
+
+ return 0;
+}
+
+
+/* -- Secure-OS SCM call interface. ----------------------------------------- */
+
+#define QCTEE_TZ_OWNER_TZ_APPS 48
+#define QCTEE_TZ_OWNER_QSEE_OS 50
+
+#define QCTEE_TZ_SVC_APP_ID_PLACEHOLDER 0
+#define QCTEE_TZ_SVC_APP_MGR 1
+
+enum qctee_os_scm_result {
+ QCTEE_OS_RESULT_SUCCESS = 0,
+ QCTEE_OS_RESULT_INCOMPLETE = 1,
+ QCTEE_OS_RESULT_BLOCKED_ON_LISTENER = 2,
+ QCTEE_OS_RESULT_FAILURE = 0xFFFFFFFF,
+};
+
+enum qctee_os_scm_resp_type {
+ QCTEE_OS_SCM_RES_APP_ID = 0xEE01,
+ QCTEE_OS_SCM_RES_QSEOS_LISTENER_ID = 0xEE02,
+};
+
+/**
+ * struct qctee_os_scm_resp - TrEE / TzOS SCM call response.
+ * @status: Status of the SCM call. See &enum qctee_os_scm_result.
+ * @resp_type: Type of the response. See &enum qctee_os_scm_resp_type.
+ * @data: Response data. The type of this data is given in @resp_type.
+ */
+struct qctee_os_scm_resp {
+ u64 status;
+ u64 resp_type;
+ u64 data;
+};
+
+int qctee_os_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qctee_os_scm_resp *res);
+
+
+/* -- Secure App interface. ------------------------------------------------- */
+
+#define QCTEE_MAX_APP_NAME_SIZE 64
+
+int qctee_app_get_id(struct device *dev, const char *app_name, u32 *app_id);
+int qctee_app_send(struct device *dev, u32 app_id, struct qctee_dma *req, struct qctee_dma *rsp);
+
+#endif /* _LINUX_QCOM_TEE_H */
--
2.37.1
