Re: [PATCH 10/10] arm64: dts: qcom: sdm845: add LLCC BWMON

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/07/2022 03:22, Steev Klimaszewski wrote:
> Hi Krzysztof,
> 
> On 7/20/22 2:28 PM, Krzysztof Kozlowski wrote:
>> The SDM845 comes with few instances of Bandwidth Monitor.  The already
>> supported one monitors traffic between CPU and Last Level Cache
>> Controller (LLCC) and in downstream sources is called BWMON v4 (or v4 of
>> register layout).
>>
>> SDM845 also has also BWMON instance measuring traffic between LLCC and
>> memory with different register layout: called v5.
>>
>> Cc: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>> ---
>>   arch/arm64/boot/dts/qcom/sdm845.dtsi | 37 ++++++++++++++++++++++++++++
>>   1 file changed, 37 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> index fe14f7e7523b..4aab464e2bd6 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> @@ -2053,6 +2053,43 @@ llcc: system-cache-controller@1100000 {
>>   			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
>>   		};
>>   
>> +		pmu@114a000 {
>> +			compatible = "qcom,sdm845-llcc-bwmon";
>> +			reg = <0 0x0114a000 0 0x1000>;
>> +			interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
>> +			interconnects = <&mem_noc MASTER_LLCC 3 &mem_noc SLAVE_EBI1 3>;
>> +
>> +			operating-points-v2 = <&llcc_bwmon_opp_table>;
>> +
>> +			llcc_bwmon_opp_table: opp-table {
>> +				compatible = "operating-points-v2";
>> +
>> +				/*
>> +				 * The interconnect path bandwidth taken from
>> +				 * cpu4_opp_table bandwidth for gladiator_noc-mem_noc
>> +				 * interconnect.  This also matches the
>> +				 * bandwidth table of qcom,llccbw (qcom,bw-tbl,
>> +				 * bus width: 4 bytes) from msm-4.9 downstream
>> +				 * kernel.
>> +				 */
>> +				opp-0 {
>> +					opp-peak-kBps = <800000>;
>> +				};
>> +				opp-1 {
>> +					opp-peak-kBps = <1804000>;
>> +				};
>> +				opp-2 {
>> +					opp-peak-kBps = <3072000>;
>> +				};
>> +				opp-3 {
>> +					opp-peak-kBps = <5412000>;
>> +				};
>> +				opp-4 {
>> +					opp-peak-kBps = <7216000>;
>> +				};
>> +			};
>> +		};
>> +
>>   		pmu@1436400 {
>>   			compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon";
>>   			reg = <0 0x01436400 0 0x600>;
> 
> 
> With this series applied, testing on a Lenovo Yoga C630, which has an 
> SDM850, I see the following:
> 
> [    3.673660] qcom-bwmon 114a000.pmu: can't request region for resource 
> [mem 0x0114a000-0x0114afff]
> [    3.673673] qcom-bwmon 114a000.pmu: error -EBUSY: failed to map bwmon 
> registers
> [    3.673678] qcom-bwmon: probe of 114a000.pmu failed with error -16
> 

Thanks for the report. What are you running there? `uname -r`? Maybe
your secure world uses it?

Best regards,
Krzysztof



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux