On 21/07/2022 17:40, Parikshit Pareek wrote:
> Create new dts file specific for Qdrive board based on sa8540p chipset.
s/dts/DTS/
s/sa8450p/SA8450P/
> Introduce common dtsi file sa8295p-adp.dtsi, to be included for adp and
> Qdrive board.
Thank you for your patch. There is something to discuss/improve.
>
> Signed-off-by: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 378 +----------------
> arch/arm64/boot/dts/qcom/sa8295p-adp.dtsi | 385 ++++++++++++++++++
> arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts | 15 +
> 4 files changed, 403 insertions(+), 376 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sa8295p-adp.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 9e2a13d75f9d..fa0abcf7660b 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sa8540p-adp-ride.dtb
Align formatting with the rest.
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> index 9398f0349944..adb6637117bc 100644
> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> @@ -2,388 +2,14 @@
> /*
> * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> * Copyright (c) 2022, Linaro Limited
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> /dts-v1/;
>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> -#include <dt-bindings/spmi/spmi.h>
> -
> -#include "sa8540p.dtsi"
> +#include "sa8295p-adp.dtsi"
>
> / {
> model = "Qualcomm SA8295P ADP";
> compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
> -
> - aliases {
> - serial0 = &qup2_uart17;
> - };
> -
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -};
> -
You need to split the patch. First into DTSI split, so we can easily
compare the diffs. Then add new board.
Best regards,
Krzysztof
