On Tue 19 Jul 07:23 CDT 2022, Christian Marangi wrote:
> On Mon, Jul 18, 2022 at 11:42:29PM -0500, Bjorn Andersson wrote:
> > On Thu 07 Jul 19:03 CDT 2022, Christian Marangi wrote:
> >
> > > Convert lcc-ipq806x driver to parent_data API.
> > >
> > > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> > > ---
> > > v5:
> > > - Fix the same compilation error (don't know what the hell happen
> > > to my buildroot)
> > > v4:
> > > - Fix compilation error
> > > v3:
> > > - Inline pxo pll4 parent
> > > - Change .name from pxo to pxo_board
> > >
> > > drivers/clk/qcom/lcc-ipq806x.c | 77 ++++++++++++++++++----------------
> > > 1 file changed, 42 insertions(+), 35 deletions(-)
> > >
> > > diff --git a/drivers/clk/qcom/lcc-ipq806x.c b/drivers/clk/qcom/lcc-ipq806x.c
> > > index ba90bebba597..72d6aea5be30 100644
> > > --- a/drivers/clk/qcom/lcc-ipq806x.c
> > > +++ b/drivers/clk/qcom/lcc-ipq806x.c
> > > @@ -34,7 +34,9 @@ static struct clk_pll pll4 = {
> > > .status_bit = 16,
> > > .clkr.hw.init = &(struct clk_init_data){
> > > .name = "pll4",
> > > - .parent_names = (const char *[]){ "pxo" },
> > > + .parent_data = &(const struct clk_parent_data) {
> > > + .fw_name = "pxo", .name = "pxo_board",
> >
> > This changes the behavior from looking for the globally named "pxo" to
> > look for the globally named "pxo_board", in the event that no
> > clock-names of "pxo" was found (based on the .fw_name).
> >
> > So you probably want to keep this as .fw_name = "pxo", .name = "pxo".
> >
>
> Hi,
> I will make this change but just for reference, I could be wrong by
> Dimitry pointed out that the pattern is .fw_name pxo .name pxo_board.
> The original patch had both set to pxo and it was asked to be changed.
>
I see, so we currently have gcc registering a fixed clock to "create"
"pxo" out of "pxo_board" and with this change we'd hook onto pxo
directly. Which would then allow us to drop the creation of "pxo" in
gcc.
I'm in favor of this plan, but this makes the change not only a
transition from parent_names to parent_data, so could you please
document that you're changing this parent.
> > > + },
> > > .num_parents = 1,
> > > .ops = &clk_pll_ops,
> > > },
> > > @@ -64,9 +66,9 @@ static const struct parent_map lcc_pxo_pll4_map[] = {
> > > { P_PLL4, 2 }
> > > };
> > >
> > > -static const char * const lcc_pxo_pll4[] = {
> > > - "pxo",
> > > - "pll4_vote",
> > > +static const struct clk_parent_data lcc_pxo_pll4[] = {
> > > + { .fw_name = "pxo", .name = "pxo" },
> > > + { .fw_name = "pll4_vote", .name = "pll4_vote" },
> >
> > This is a reference to a clock defined in this same driver, so you can
> > use { .hw = &pll4_vote.clkr.hw } to avoid the lookup all together.
> >
>
> Eh... pll4_vote is defined in gcc (for some reason) the one we have here
> is pll4.
>
> I asked if this could be fixed in some way but it was said that it's
> better to not complicate things too much.
>
Sorry for the noise, I didn't pay attention to the gcc/lcc split.
This seems reasonable.
Presumably though, you should make the pxo -> pxo_board transition for
.name here as well then?
Regards,
Bjorn
> > > };
> > >
> > > static struct freq_tbl clk_tbl_aif_mi2s[] = {
> > > @@ -131,18 +133,14 @@ static struct clk_rcg mi2s_osr_src = {
> > > .enable_mask = BIT(9),
> > > .hw.init = &(struct clk_init_data){
> > > .name = "mi2s_osr_src",
> > > - .parent_names = lcc_pxo_pll4,
> > > - .num_parents = 2,
> > > + .parent_data = lcc_pxo_pll4,
> > > + .num_parents = ARRAY_SIZE(lcc_pxo_pll4),
> > > .ops = &clk_rcg_ops,
> > > .flags = CLK_SET_RATE_GATE,
> > > },
> > > },
> > > };
> > >
> > > -static const char * const lcc_mi2s_parents[] = {
> > > - "mi2s_osr_src",
> > > -};
> > > -
> > > static struct clk_branch mi2s_osr_clk = {
> > > .halt_reg = 0x50,
> > > .halt_bit = 1,
> > > @@ -152,7 +150,9 @@ static struct clk_branch mi2s_osr_clk = {
> > > .enable_mask = BIT(17),
> > > .hw.init = &(struct clk_init_data){
> > > .name = "mi2s_osr_clk",
> > > - .parent_names = lcc_mi2s_parents,
> > > + .parent_hws = (const struct clk_hw*[]){
> > > + &mi2s_osr_src.clkr.hw,
> > > + },
> > > .num_parents = 1,
> > > .ops = &clk_branch_ops,
> > > .flags = CLK_SET_RATE_PARENT,
> > > @@ -167,7 +167,9 @@ static struct clk_regmap_div mi2s_div_clk = {
> > > .clkr = {
> > > .hw.init = &(struct clk_init_data){
> > > .name = "mi2s_div_clk",
> > > - .parent_names = lcc_mi2s_parents,
> > > + .parent_hws = (const struct clk_hw*[]){
> >
> > It would be wonderful if you could keep a space between ) and { in
> > these.
> >
>
> You mean only here or in the entire patch? I assume the latter.
>
> > > + &mi2s_osr_src.clkr.hw,
> > > + },
> > > .num_parents = 1,
> > > .ops = &clk_regmap_div_ops,
> > > },
> > > @@ -183,7 +185,9 @@ static struct clk_branch mi2s_bit_div_clk = {
> > > .enable_mask = BIT(15),
> > > .hw.init = &(struct clk_init_data){
> > > .name = "mi2s_bit_div_clk",
> > > - .parent_names = (const char *[]){ "mi2s_div_clk" },
> > > + .parent_hws = (const struct clk_hw*[]){
> > > + &mi2s_div_clk.clkr.hw,
> > > + },
> > > .num_parents = 1,
> > > .ops = &clk_branch_ops,
> > > .flags = CLK_SET_RATE_PARENT,
> > > @@ -191,6 +195,10 @@ static struct clk_branch mi2s_bit_div_clk = {
> > > },
> > > };
> > >
> > > +static const struct clk_parent_data lcc_mi2s_bit_div_codec_clk[] = {
> > > + { .hw = &mi2s_bit_div_clk.clkr.hw, },
> > > + { .fw_name = "mi2s_codec_clk", .name = "mi2s_codec_clk" },
> >
> > Is mi2s_codec_clk and external clock? I don't see it documented in the
> > DT binding. And if we're introducing new clock-names, perhaps we could
> > skip the _clk suffix - because obviously it's a clock :)
> >
> > Regards,
> > Bjorn
> >
>
> I also didn't find where is mi2s_codec_clk... but yes I will change the
> fw_name with the clock with _clk stripped.
>
> Will send v6 with the other question clarified.
>
> > > +};
> > >
> > > static struct clk_regmap_mux mi2s_bit_clk = {
> > > .reg = 0x48,
> > > @@ -199,11 +207,8 @@ static struct clk_regmap_mux mi2s_bit_clk = {
> > > .clkr = {
> > > .hw.init = &(struct clk_init_data){
> > > .name = "mi2s_bit_clk",
> > > - .parent_names = (const char *[]){
> > > - "mi2s_bit_div_clk",
> > > - "mi2s_codec_clk",
> > > - },
> > > - .num_parents = 2,
> > > + .parent_data = lcc_mi2s_bit_div_codec_clk,
> > > + .num_parents = ARRAY_SIZE(lcc_mi2s_bit_div_codec_clk),
> > > .ops = &clk_regmap_mux_closest_ops,
> > > .flags = CLK_SET_RATE_PARENT,
> > > },
> > > @@ -245,8 +250,8 @@ static struct clk_rcg pcm_src = {
> > > .enable_mask = BIT(9),
> > > .hw.init = &(struct clk_init_data){
> > > .name = "pcm_src",
> > > - .parent_names = lcc_pxo_pll4,
> > > - .num_parents = 2,
> > > + .parent_data = lcc_pxo_pll4,
> > > + .num_parents = ARRAY_SIZE(lcc_pxo_pll4),
> > > .ops = &clk_rcg_ops,
> > > .flags = CLK_SET_RATE_GATE,
> > > },
> > > @@ -262,7 +267,9 @@ static struct clk_branch pcm_clk_out = {
> > > .enable_mask = BIT(11),
> > > .hw.init = &(struct clk_init_data){
> > > .name = "pcm_clk_out",
> > > - .parent_names = (const char *[]){ "pcm_src" },
> > > + .parent_hws = (const struct clk_hw*[]){
> > > + &pcm_src.clkr.hw,
> > > + },
> > > .num_parents = 1,
> > > .ops = &clk_branch_ops,
> > > .flags = CLK_SET_RATE_PARENT,
> > > @@ -270,6 +277,11 @@ static struct clk_branch pcm_clk_out = {
> > > },
> > > };
> > >
> > > +static const struct clk_parent_data lcc_pcm_clk_out_codec_clk[] = {
> > > + { .hw = &pcm_clk_out.clkr.hw, },
> > > + { .fw_name = "pcm_codec_clk", .name = "pcm_codec_clk" },
> > > +};
> > > +
> > > static struct clk_regmap_mux pcm_clk = {
> > > .reg = 0x54,
> > > .shift = 10,
> > > @@ -277,11 +289,8 @@ static struct clk_regmap_mux pcm_clk = {
> > > .clkr = {
> > > .hw.init = &(struct clk_init_data){
> > > .name = "pcm_clk",
> > > - .parent_names = (const char *[]){
> > > - "pcm_clk_out",
> > > - "pcm_codec_clk",
> > > - },
> > > - .num_parents = 2,
> > > + .parent_data = lcc_pcm_clk_out_codec_clk,
> > > + .num_parents = ARRAY_SIZE(lcc_pcm_clk_out_codec_clk),
> > > .ops = &clk_regmap_mux_closest_ops,
> > > .flags = CLK_SET_RATE_PARENT,
> > > },
> > > @@ -325,18 +334,14 @@ static struct clk_rcg spdif_src = {
> > > .enable_mask = BIT(9),
> > > .hw.init = &(struct clk_init_data){
> > > .name = "spdif_src",
> > > - .parent_names = lcc_pxo_pll4,
> > > - .num_parents = 2,
> > > + .parent_data = lcc_pxo_pll4,
> > > + .num_parents = ARRAY_SIZE(lcc_pxo_pll4),
> > > .ops = &clk_rcg_ops,
> > > .flags = CLK_SET_RATE_GATE,
> > > },
> > > },
> > > };
> > >
> > > -static const char * const lcc_spdif_parents[] = {
> > > - "spdif_src",
> > > -};
> > > -
> > > static struct clk_branch spdif_clk = {
> > > .halt_reg = 0xd4,
> > > .halt_bit = 1,
> > > @@ -346,7 +351,9 @@ static struct clk_branch spdif_clk = {
> > > .enable_mask = BIT(12),
> > > .hw.init = &(struct clk_init_data){
> > > .name = "spdif_clk",
> > > - .parent_names = lcc_spdif_parents,
> > > + .parent_hws = (const struct clk_hw*[]){
> > > + &spdif_src.clkr.hw,
> > > + },
> > > .num_parents = 1,
> > > .ops = &clk_branch_ops,
> > > .flags = CLK_SET_RATE_PARENT,
> > > @@ -384,8 +391,8 @@ static struct clk_rcg ahbix_clk = {
> > > .enable_mask = BIT(11),
> > > .hw.init = &(struct clk_init_data){
> > > .name = "ahbix",
> > > - .parent_names = lcc_pxo_pll4,
> > > - .num_parents = 2,
> > > + .parent_data = lcc_pxo_pll4,
> > > + .num_parents = ARRAY_SIZE(lcc_pxo_pll4),
> > > .ops = &clk_rcg_lcc_ops,
> > > },
> > > },
> > > --
> > > 2.36.1
> > >
>
> --
> Ansuel
