Re: [PATCH v2 5/5] arm64: dts: qcom: Add device tree for Sony Xperia 1 IV

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 14/07/22 15:38, Konrad Dybcio ha scritto:


On 14.07.2022 14:51, AngeloGioacchino Del Regno wrote:
Il 14/07/22 14:34, Konrad Dybcio ha scritto:
Add support for Sony Xperia 1 IV, a.k.a PDX223. This device is a part
of the SoMC SM8450 Nagara platform and currently it is the only
device based on that board, so no -common DTSI is created until (if?)
other Nagara devices appear.

This commit brings support for:
* SD Card
* USB (*including SuperSpeed*)
* ADSP/CDSP/SLPI (modem remains untested for now)
* Most regulators (some GPIO-enabled ones require PMIC GPIOs but
trying to access any SPMI device crashes the device..)
* Part of I2C-connected peripherals (notably no touch due to a
driver bug)
* PCIe0 (PCIe1 is unused)

Do note display via simplefb is not supported, as the display is blanked
upon exiting XBL.

To create a working boot image, you need to run:
cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8450-sony-xperia-\
nagara-pdx223.dtb > .Image.gz-dtb

mkbootimg \
--kernel .Image.gz-dtb \
--ramdisk some_initrd.img \
--pagesize 4096 \
--base 0x0 \
--kernel_offset 0x8000 \
--ramdisk_offset 0x1000000 \
--tags_offset 0x100 \
--cmdline "SOME_CMDLINE" \
--dtb_offset 0x1f00000 \
--header_version 1 \
--os_version 12 \
--os_patch_level 2022-06 \ # or newer
-o boot.img-sony-xperia-pdx223

Then, you need to flash it on the device and get rid of all the
vendor_boot/dtbo mess:

// You have to either pull vbmeta{"","_system"} from
// /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system \
vbmeta_system.img

fastboot flash boot boot.img-sony-xperia-pdx223
fastboot erase vendor_boot
fastboot erase recovery
fastboot flash dtbo emptydtbo.img
fastboot reboot

Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing
a "fastboot erase" won't cut it, the bootloader will go crazy and things will
fall apart when it tries to overlay random bytes from an empty partition onto a
perfectly good appended DTB.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
Changes since v1:
- remove a stray blank line
- use generic node names for CS35L41
- fix up indentation for sdhci-caps-mask

   arch/arm64/boot/dts/qcom/Makefile             |   1 +
   .../qcom/sm8450-sony-xperia-nagara-pdx223.dts | 634 ++++++++++++++++++
   2 files changed, 635 insertions(+)
   create mode 100644 arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 01773f3ce57f..157ef6958e1f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -126,3 +126,4 @@ dtb-$(CONFIG_ARCH_QCOM)    += sm8350-sony-xperia-sagami-pdx214.dtb
   dtb-$(CONFIG_ARCH_QCOM)    += sm8350-sony-xperia-sagami-pdx215.dtb
   dtb-$(CONFIG_ARCH_QCOM)    += sm8450-hdk.dtb
   dtb-$(CONFIG_ARCH_QCOM)    += sm8450-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)    += sm8450-sony-xperia-nagara-pdx223.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
new file mode 100644
index 000000000000..7fe582b92a61
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
@@ -0,0 +1,634 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8450.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &video_mem;
+
+/ {
+    model = "Sony Xperia 1 IV";
+    compatible = "sony,pdx223", "qcom,sm8450";
+    chassis-type = "handset";
+

..snip..

+
+&gpi_dma0 {
+    status = "okay";
+};
+
+&gpi_dma1 {
+    status = "okay";
+};
+
+&gpi_dma2 {
+    status = "okay";
+};
+
+/* I2C4 is used, it hosts a Samsung touchscreen, but GPI DMA is broken.. */

Why aren't you enabling i2c4 like you did with i2c 5/9/13?

If enabling that produces any side effect you should advertise that.
The comment explains it, no point in enabling it if not even the dma engine
behind it is functioning properly and you can't interact with the bus, waste
of power and cpu cycles.


The comment is not explaining whether enabling the bus, without adding any
device node, would produce side effects.
If you can scan the bus (example: i2c-detect) without side effects, in my
opinion, it's worth enabling it anyway... you probably won't miss a couple
of CPU cycles at boot and actually enabling the functionality later will
result in a one liner commit. Would be neat.



+
+&i2c5 {
+    clock-frequency = <400000>;
+    status = "okay";
+
+    /* Dialog SLG51000 CMIC @ 75 */
+};
+
+&i2c9 {
+    clock-frequency = <400000>;
+    status = "okay";
+
+    /* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c13 {
+    clock-frequency = <400000>;
+    status = "okay";
+
+    /* Richwave RTC6226 FM Radio Receiver @ 64 */
+};
+
+&i2c14 {
+    clock-frequency = <1000000>;
+    status = "okay";
+
+    cs35l41_l: speaker-amp@40 {

What about an even more generic audio-amplifier@40 ?
That's really an arbitrary barrier to decide when it's "generic enough", I'll
leave that up to the maintainers to decide.


Fair enough. I don't have any *strong* feelings about using 'audio-amplifier'
anyway :-)



+        compatible = "cirrus,cs35l41";
+        reg = <0x40>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+        cirrus,boost-peak-milliamp = <4000>;
+        cirrus,boost-ind-nanohenry = <1000>;
+        cirrus,boost-cap-microfarad = <15>;
+        cirrus,gpio2-src-select = <2>;
+        cirrus,gpio2-output-enable;
+        cirrus,asp-sdout-hiz = <3>;
+        #sound-dai-cells = <1>;
+    };
+
+    cs35l41_r: speaker-amp@41 {
+        compatible = "cirrus,cs35l41";
+        reg = <0x41>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+        cirrus,boost-peak-milliamp = <4000>;
+        cirrus,boost-ind-nanohenry = <1000>;
+        cirrus,boost-cap-microfarad = <15>;
+        cirrus,gpio2-src-select = <2>;
+        cirrus,gpio2-output-enable;
+        cirrus,asp-sdout-hiz = <3>;
+        #sound-dai-cells = <1>;
+    };
+};
+

..snip..

+
+&sdhc_2 {
+    cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+    pinctrl-names = "default", "sleep";
+    pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+    pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+    vmmc-supply = <&pm8350c_l9>;
+    vqmmc-supply = <&pm8350c_l6>;

+    /* Forbid SDR104/SDR50 - broken hw! */
+    sdhci-caps-mask = <0x3 0x0>;

Is this a device-specific quirk? Is Sony hardware broken, or is it a SoC
(or SoC version-specific) issue?

If this is a SoC-specific issue, that should be rectified in sdhci-msm instead.
If it was a SoC-specific issue, it would land in the SoC-specific DTSI. This is the
PDX223-specific DTSI, so I think it's pretty clear..



If you took that from downstream, I would still ask for clarification to somebody
at Qualcomm, or anybody else who might know.

Besides, if you're sure that this is a machine-specific issue, please rectify
the comment for the sake of readability with something like:

/* Forbid SDR104/SDR50 due to board-specific issues */

Regards,
Angelo




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux