On 13.07.2022 23:23, Bjorn Andersson wrote:
> Both Castor and Honami has RGB LEDs driven by the PM8941 LPG, define
> these.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Konrad
>
> Changes since v1:
> - Corrected unit addresses and sort order of channels
>
> .../dts/qcom-msm8974-sony-xperia-rhine.dtsi | 30 +++++++++++++++++++
> ...-msm8974pro-sony-xperia-shinano-castor.dts | 30 +++++++++++++++++++
> 2 files changed, 60 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
> index d42b85bda33a..5a70683d9103 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
> @@ -3,6 +3,7 @@
> #include "qcom-pm8841.dtsi"
> #include "qcom-pm8941.dtsi"
> #include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>
> / {
> @@ -172,6 +173,35 @@ gpio_keys_pin_a: gpio-keys-active-state {
> };
> };
>
> +&pm8941_lpg {
> + status = "okay";
> +
> + qcom,power-source = <1>;
> +
> + rgb-led {
> + color = <LED_COLOR_ID_RGB>;
> + function = LED_FUNCTION_STATUS;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@5 {
> + reg = <5>;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> +
> + led@6 {
> + reg = <6>;
> + color = <LED_COLOR_ID_GREEN>;
> + };
> +
> + led@7 {
> + reg = <7>;
> + color = <LED_COLOR_ID_RED>;
> + };
> + };
> +};
> +
> &pm8941_wled {
> status = "okay";
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> index 9fc696a7399a..3f45f5c5d37b 100644
> --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> @@ -3,6 +3,7 @@
> #include "qcom-pm8841.dtsi"
> #include "qcom-pm8941.dtsi"
> #include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>
> / {
> @@ -288,6 +289,35 @@ lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
>
> };
>
> +&pm8941_lpg {
> + status = "okay";
> +
> + qcom,power-source = <1>;
> +
> + rgb-led {
> + color = <LED_COLOR_ID_RGB>;
> + function = LED_FUNCTION_STATUS;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@5 {
> + reg = <5>;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> +
> + led@6 {
> + reg = <6>;
> + color = <LED_COLOR_ID_GREEN>;
> + };
> +
> + led@7 {
> + reg = <7>;
> + color = <LED_COLOR_ID_RED>;
> + };
> + };
> +};
> +
> &rpm_requests {
> pm8941-regulators {
> compatible = "qcom,rpm-pm8941-regulators";
