[PATCH v2 0/4] ARM: dts: apq8064 DT patches

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



These patches adds dt nodes for RPM, USB and SATA IPs found in APQ8064.
All the driver support for these IPs are already available in v3.17, except
the RPM driver which is now accepted by Lee and Mark.

These patches depend on the header file from 
http://www.spinics.net/lists/arm-kernel/msg364310.html
for regulators.

Now that the RPM patch is accepted, should RPM patch go via arm-soc tree?
so that we can get more functionality on IFC6410 board in v3.18 mainline.

All these patches are tested on IFC6410 board.
Am hoping to get these patches for v3.18, as these patches were sitting in
my dev tree since last 3 merge windows.

Changes since v1:
	- Updated with all the regulators in the rpm as suggested by Bjorn.
	- Fixed few indentations spotted by both Bjorn, Stephen and others.
	

Thanks,
srini


Srinivas Kandagatla (4):
  ARM: dts: apq8064: add RPM regulators support
  ARM: dts: apq8064: Add usb host support.
  ARM: dts: apq8064: Add USB OTG support
  ARM: dts: apq8064: Add SATA controller support.

 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts |  38 +++
 arch/arm/boot/dts/qcom-apq8064.dtsi        | 424 +++++++++++++++++++++++++++++
 2 files changed, 462 insertions(+)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux