There is no need to specify "minItems" if it equals to "maxItems". On the
other hand number of items in an array can be specified via describing
items, which might bring some additional information. This simplifies a
bit the binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/bus/qcom,ssc-block-bus.yaml | 25 ++++++++-----------
1 file changed, 11 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
index 5b9705079015..8e9e6ff35d7d 100644
--- a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
+++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
@@ -28,11 +28,9 @@ properties:
- const: qcom,ssc-block-bus
reg:
- description: |
- Shall contain the addresses of the SSCAON_CONFIG0 and SSCAON_CONFIG1
- registers
- minItems: 2
- maxItems: 2
+ items:
+ - description: SSCAON_CONFIG0 registers
+ - description: SSCAON_CONFIG1 registers
reg-names:
items:
@@ -48,7 +46,6 @@ properties:
ranges: true
clocks:
- minItems: 6
maxItems: 6
clock-names:
@@ -61,9 +58,9 @@ properties:
- const: ssc_ahbs
power-domains:
- description: Power domain phandles for the ssc_cx and ssc_mx power domains
- minItems: 2
- maxItems: 2
+ items:
+ - description: CX power domain
+ - description: MX power domain
power-domain-names:
items:
@@ -71,11 +68,11 @@ properties:
- const: ssc_mx
resets:
- description: |
- Reset phandles for the ssc_reset and ssc_bcr resets (note: ssc_bcr is the
- branch control register associated with the ssc_xo and ssc_ahbs clocks)
- minItems: 2
- maxItems: 2
+ items:
+ - description: Main reset
+ - description:
+ SSC Branch Control Register reset (associated with the ssc_xo and
+ ssc_ahbs clocks)
reset-names:
items:
--
2.34.1
