Re: [V5] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Jul 12, 2022 at 5:45 AM Vijaya Krishna Nivarthi
<quic_vnivarth@xxxxxxxxxxx> wrote:
>
> In the logic around call to clk_round_rate(), for some corner conditions,
> get_clk_div_rate() could return an sub-optimal clock rate. Also, if an
> exact clock rate was not found lowest clock was being returned.
>
> Search for suitable clock rate in 2 steps
> a) exact match or within 2% tolerance
> b) within 5% tolerance
> This also takes care of corner conditions.
>
> Fixes: c2194bc999d4 ("tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate")
> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
> ---
> v5: corrected format specifiers for logs
> v4: replaced pr_dbg calls with dev_dbg
> v3: simplified algorithm further, fixed robot compile warnings
> v2: removed minor optimisations to make more readable
> v1: intial patch contained slightly complicated logic
> ---
>  drivers/tty/serial/qcom_geni_serial.c | 89 +++++++++++++++++++++--------------
>  1 file changed, 54 insertions(+), 35 deletions(-)

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux