[PATCH 6/6] clk: qcom: apss-ipq-pll: add support for IPQ8074

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for IPQ8074 since it uses the same PLL setup, however it does
not require the Alpha PLL to be reconfigured.

Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
 drivers/clk/qcom/apss-ipq-pll.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index bef7899ad0d6..acfb3ec4f142 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -55,6 +55,7 @@ static const struct regmap_config ipq_pll_regmap_config = {
 static int apss_ipq_pll_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
 	struct regmap *regmap;
 	void __iomem *base;
 	int ret;
@@ -67,7 +68,8 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-	clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
+	if (of_device_is_compatible(node, "qcom,ipq6018-a53pll"))
+		clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
 
 	ret = devm_clk_register_regmap(dev, &ipq_pll.clkr);
 	if (ret)
@@ -79,6 +81,7 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
 
 static const struct of_device_id apss_ipq_pll_match_table[] = {
 	{ .compatible = "qcom,ipq6018-a53pll" },
+	{ .compatible = "qcom,ipq8074-a53pll" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
-- 
2.36.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux