[PATCH v14 03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable rx, tx and va macro codecs and soundwire nodes for
CRD rev5+ (aka CRD 3.0/3.1) boards.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
 .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi   | 22 ++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi         | 22 ++++++++++++++++++++++
 2 files changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index 859faaa..1c0bb7c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -5,6 +5,28 @@
  * Copyright (c) 2022, The Linux Foundation. All rights reserved.
  */
 
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+};
+
+&swr0 {
+	status = "okay";
+};
+
+&swr1 {
+	status = "okay";
+};
+
 /* PINCTRL */
 
 &lpass_dmic01_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index 4c25ffc..ee7d52a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -309,6 +309,10 @@
 	modem-init;
 };
 
+&lpass_va_macro {
+	vdd-micb-supply = <&vreg_bob>;
+};
+
 /* NOTE: Not all Qcards have eDP connector stuffed */
 &mdss_edp {
 	vdda-0p9-supply = <&vdd_a_edp_0_0p9>;
@@ -381,6 +385,24 @@
 	no-sdio;
 };
 
+&swr0 {
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		#sound-dai-cells = <1>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr1 {
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		#sound-dai-cells = <1>;
+		qcom,tx-port-mapping = <1 2 3 4>;
+	};
+};
+
 uart_dbg: &uart5 {
 	compatible = "qcom,geni-debug-uart";
 	status = "okay";
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux