On 6.07.2022 14:56, Christian Marangi wrote: > On Wed, Jul 06, 2022 at 03:03:32PM +0200, Konrad Dybcio wrote: >> >> >> On 5.07.2022 15:39, Christian Marangi wrote: >>> Mikrotik RB3011 have a special configuration where the regulators are >>> not the common smb208 controlled by RPM but they use a TPS563900 >>> controlled via i2c. Disable the smb208 for this specific device. >> Ok, so that answers my question from the previous email. >> Please define the SMB208 regulators only in the DTs of >> boards that actually use it, as it is not a SoC component as >> far as I can tell. >> >> Konrad > > This was already discuessed, Yeah sorry, I didn't notice earlier and started reviewing patches that were already reviewed by others. rb3011 is the exception, qcom for ipq8064 > recommends to use smb208 but gives the option to implement it in their > own way. So again we have 28 device with smb208 and 1 device that use > its own special way... > > Wonder if a separate dtsi can be used for this if we really can't put > smb208 in ipq8064 dtsi? There's msm8916-pm8916.dtsi. You can follow. Konrad [...]
