Add allowable C-States for each cpu using the cpu-idle-states node. ARM spec dictates WFI as the default idle state at 0. Support standalone power collapse (power down that does not affect any SoC idle states) for each cpu. Signed-off-by: Lina Iyer <lina.iyer@xxxxxxxxxx> --- arch/arm/boot/dts/qcom-msm8974.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 828f5bb..cb710ce 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -22,6 +22,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_WFI &CPU_SPC>; }; cpu@1 { @@ -32,6 +33,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_WFI &CPU_SPC>; }; cpu@2 { @@ -42,6 +44,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_WFI &CPU_SPC>; }; cpu@3 { @@ -52,6 +55,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_WFI &CPU_SPC>; }; L2: l2-cache { @@ -59,6 +63,22 @@ cache-level = <2>; qcom,saw = <&saw_l2>; }; + + idle-states { + CPU_WFI: wfi { + compatible = "qcom,idle-state-wfi", "arm,idle-state"; + entry-latency-us = <1>; + exit-latency-us = <1>; + min-residency-us = <2>; + }; + + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; }; cpu-pmu { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html