On Fri, Sep 26 2014 at 13:04 -0600, Kevin Hilman wrote:
Lina Iyer <lina.iyer@xxxxxxxxxx> writes:
On Wed, Sep 24 2014 at 12:07 -0600, Kumar Gala wrote:
On Sep 23, 2014, at 6:51 PM, Lina Iyer <lina.iyer@xxxxxxxxxx> wrote:
Based on work by many authors, available at codeaurora.org
SPM is a hardware block that controls the peripheral logic surrounding
the application cores (cpu/l$). When the core executes WFI instruction,
the SPM takes over the putting the core in low power state as
configured. The wake up for the SPM is an interrupt at the GIC, which
then completes the rest of low power mode sequence and brings the core
out of low power mode.
The SPM has a set of control registers that configure the SPMs
individually based on the type of the core and the runtime conditions.
SPM is a finite state machine block to which a sequence is provided and
it interprets the bytes and executes them in sequence. Each low power
mode that the core can enter into is provided to the SPM as a sequence.
Configure the SPM to set the core (cpu or L2) into its low power mode,
the index of the first command in the sequence is set in the SPM_CTL
register. When the core executes ARM wfi instruction, it triggers the
SPM state machine to start executing from that index. The SPM state
machine waits until the interrupt occurs and starts executing the rest
of the sequence until it hits the end of the sequence. The end of the
sequence jumps the core out of its low power mode.
Signed-off-by: Lina Iyer <lina.iyer@xxxxxxxxxx>
[lina: simplify the driver for initial submission, clean up and update
commit text]
---
Documentation/devicetree/bindings/arm/msm/spm.txt | 43 +++
drivers/soc/qcom/Kconfig | 8 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/spm.c | 388 ++++++++++++++++++++++
include/soc/qcom/spm.h | 38 +++
5 files changed, 478 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/msm/spm.txt
create mode 100644 drivers/soc/qcom/spm.c
create mode 100644 include/soc/qcom/spm.h
General comment, lets use qcom instead of msm for various things.
[snip]
OK, Done. I renamed all msm_ functions to qcom_ functions as well.
Does that apply to the other parts of this series too? like the msm-pm
and cpuidle layers?
Yes, there are no more msm's anymore :)
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
