The QMP PCIe PHY provides a single clock so drop the redundant clock
index from the first PCIe PHY and add the missing '#clock-cells'
properties to the second and third PHY nodes.
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 34fd0c68b6e8..b670d0412760 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -609,7 +609,7 @@ pciephy_0: phy@35000 {
<0x00035400 0x1dc>;
#phy-cells = <0>;
- #clock-cells = <1>;
+ #clock-cells = <0>;
clock-output-names = "pcie_0_pipe_clk_src";
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
clock-names = "pipe0";
@@ -623,6 +623,7 @@ pciephy_1: phy@36000 {
<0x00036400 0x1dc>;
#phy-cells = <0>;
+ #clock-cells = <0>;
clock-output-names = "pcie_1_pipe_clk_src";
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
clock-names = "pipe1";
@@ -636,6 +637,7 @@ pciephy_2: phy@37000 {
<0x00037400 0x1dc>;
#phy-cells = <0>;
+ #clock-cells = <0>;
clock-output-names = "pcie_2_pipe_clk_src";
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
clock-names = "pipe2";
--
2.35.1
