To support path tag in icc-rpm driver, the "#interconnect-cells"
property is updated as enumerate values: 1 or 2. Setting to 1 means
it is compatible with old DT binding that interconnect path only
contains node id; if set to 2 for "#interconnect-cells" property, then
the second specifier is used as a tag (e.g. vote for which buckets).
Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
---
.../devicetree/bindings/interconnect/qcom,rpm.yaml | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
index 8a676fef8c1d..cdfe419e7339 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -45,7 +45,12 @@ properties:
- qcom,sdm660-snoc
'#interconnect-cells':
- const: 1
+ description: |
+ Number of interconnect specifier. Value: <1> is one cell in a
+ interconnect specifier for the interconnect node id, <2> requires
+ the interconnect node id and an extra path tag.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1, 2 ]
clocks:
minItems: 2
--
2.25.1
