Re: [PATCH v3 1/2] iio: vadc: Qualcomm SPMI PMIC voltage ADC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ivan,

On 09/25/2014 03:47 PM, Ivan T. Ivanov wrote:
> 
> Hi Stan, few comment bellow.
> 
> On Wed, 2014-09-24 at 15:56 +0300, Stanimir Varbanov wrote:
>> The voltage ADC is peripheral of Qualcomm SPMI PMIC chips. It has
>> 15bits resolution and register space inside PMIC accessible across
>> SPMI bus.
>>
>> The vadc driver registers itself through IIO interface.
>>
>> Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
>> Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
>> ---
>>  drivers/iio/adc/Kconfig                       |   10 +
>>  drivers/iio/adc/Makefile                      |    1 +
>>  drivers/iio/adc/qcom-spmi-vadc.c              | 1029 +++++++++++++++++++++++++
>>  include/dt-bindings/iio/qcom,spmi-pmic-vadc.h |  119 +++
>>  4 files changed, 1159 insertions(+), 0 deletions(-)
>>  create mode 100644 drivers/iio/adc/qcom-spmi-vadc.c
>>  create mode 100644 include/dt-bindings/iio/qcom,spmi-pmic-vadc.h
>>
>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>> index 11b048a..ec48360 100644
>> --- a/drivers/iio/adc/Kconfig
>> +++ b/drivers/iio/adc/Kconfig
>> @@ -206,6 +206,16 @@ config NAU7802
>>  	  To compile this driver as a module, choose M here: the
>>  	  module will be called nau7802.
>>  
>> +config QCOM_SPMI_VADC
>> +	tristate "Qualcomm SPMI PMIC voltage ADC"
>> +	depends on SPMI
> 
> + select REGMAP_SPMI

I'd suggest MFD_SPMI_PMIC symbol of the parent driver instead? The
parent MFD PMIC driver already selects REGMAP_SPMI and depends on SPMI.

> 
> <snip>
> 
>> +
>> +static int vadc_read(struct vadc_priv *vadc, u16 offset, u8 *data)
>> +{
>> +	return regmap_bulk_read(vadc->regmap, vadc->base + offset, data, 1);
> 
> just regmap_read() ?

No, regmap_read() expects unsigned int *val as an argument hence I will
need temporary variable. I had a comment to rework this on the first
version of the patchset.

> 
>> +}
>> +
> 
> General comment, most of the dev_dbg looks like legitimate dev_err's to me.

I've decided to not flood console with messages. If someone wants to
debug why the driver doesn't probed he can define DEBUG.

-- 
regards,
Stan
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux