On 20/06/2022 13:00, Mao Jinlong wrote:
TPDA(Trace, Profiling and Diagnostics Aggregator) is
to provide packetization, funneling and timestamping of
TPDM data. Multiple monitors are connected to different
input ports of TPDA.This change is to add tpda
enable/disable/probe functions for coresight tpda driver.
- - - - - - - - - - - -
| TPDM 0| | TPDM 1 | | TPDM 2|
- - - - - - - - - - - -
| | |
|_ _ _ _ _ _ | _ _ _ _ |
| | |
| | |
------------------
| TPDA |
------------------
Signed-off-by: Tao Zhang <quic_taozha@xxxxxxxxxxx>
Signed-off-by: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
---
drivers/hwtracing/coresight/Kconfig | 11 +
drivers/hwtracing/coresight/Makefile | 1 +
drivers/hwtracing/coresight/coresight-tpda.c | 206 +++++++++++++++++++
drivers/hwtracing/coresight/coresight-tpda.h | 35 ++++
4 files changed, 253 insertions(+)
create mode 100644 drivers/hwtracing/coresight/coresight-tpda.c
create mode 100644 drivers/hwtracing/coresight/coresight-tpda.h
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
index b2b72a35e416..0cbebfd0d23e 100644
--- a/drivers/hwtracing/coresight/Kconfig
+++ b/drivers/hwtracing/coresight/Kconfig
@@ -205,6 +205,7 @@ config CORESIGHT_TRBE
config CORESIGHT_TPDM
tristate "CoreSight Trace, Profiling & Diagnostics Monitor driver"
select CORESIGHT_LINKS_AND_SINKS
+ select CORESIGHT_TPDA
help
This driver provides support for configuring monitor. Monitors are
primarily responsible for data set collection and support the
@@ -213,4 +214,14 @@ config CORESIGHT_TPDM
To compile this driver as a module, choose M here: the module will be
called coresight-tpdm.
+config CORESIGHT_TPDA
+ tristate "CoreSight Trace, Profiling & Diagnostics Aggregator driver"
+ help
+ This driver provides support for configuring aggregator. This is
+ primarily useful for pulling the data sets from one or more
+ attached monitors and pushing the resultant data out. Multiple
+ monitors are connected on different input ports of TPDA.
+
+ To compile this driver as a module, choose M here: the module will be
+ called coresight-tpda.
endif
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
index 6bb9b1746bc7..1712d82e7260 100644
--- a/drivers/hwtracing/coresight/Makefile
+++ b/drivers/hwtracing/coresight/Makefile
@@ -26,5 +26,6 @@ obj-$(CONFIG_CORESIGHT_CATU) += coresight-catu.o
obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o
obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o
obj-$(CONFIG_CORESIGHT_TPDM) += coresight-tpdm.o
+obj-$(CONFIG_CORESIGHT_TPDA) += coresight-tpda.o
coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \
coresight-cti-sysfs.o
diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c
new file mode 100644
index 000000000000..7a0478a8b63e
--- /dev/null
+++ b/drivers/hwtracing/coresight/coresight-tpda.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/amba/bus.h>
+#include <linux/bitfield.h>
+#include <linux/coresight.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "coresight-priv.h"
+#include "coresight-tpda.h"
+#include "coresight-trace-id.h"
+
+DEFINE_CORESIGHT_DEVLIST(tpda_devs, "tpda");
+
+/* Settings pre enabling port control register */
+static void tpda_enable_pre_port(struct tpda_drvdata *drvdata)
+{
+ u32 val;
+
+ val = readl_relaxed(drvdata->base + TPDA_CR);
Even though the drvdata->atid is constant during the life time
of the driver, I would recommend clearing the field and then
setting it. e.g, if you get a different ATID on unload-load
sequence of the driver, the field will corrupted.
val &= ~TPDA_CR_ATID;
+ val |= FIELD_PREP(TPDA_CR_ATID, drvdata->atid);
+ writel_relaxed(val, drvdata->base + TPDA_CR);
+}
+
Is there no global turn-ON for the TPDA ? Or is it per-port
enable only via TPDA_Pn_CR ?
+static void tpda_enable_port(struct tpda_drvdata *drvdata, int port)
+{
+ u32 val;
+
+ val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port));
+ /* Enable the port */
+ val |= TPDA_Pn_CR_ENA;
+ writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port));
+}
+
+static void __tpda_enable(struct tpda_drvdata *drvdata, int port)
+{
+ CS_UNLOCK(drvdata->base);
+
+ if (!drvdata->csdev->enable)
+ tpda_enable_pre_port(drvdata);
+
+ tpda_enable_port(drvdata, port);
+
+ CS_LOCK(drvdata->base);
+}
+
+static int tpda_enable(struct coresight_device *csdev, int inport, int outport)
+{
+ struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
+
+ spin_lock(&drvdata->spinlock);
+ if (atomic_read(&csdev->refcnt[inport]) == 0)
+ __tpda_enable(drvdata, inport);
+
+ atomic_inc(&csdev->refcnt[inport]);
+ spin_unlock(&drvdata->spinlock);
+
+ dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", inport);
+ return 0;
+}
+
+static void __tpda_disable(struct tpda_drvdata *drvdata, int port)
+{
+ u32 val;
+
+ CS_UNLOCK(drvdata->base);
+
+ val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port));
+ val &= ~TPDA_Pn_CR_ENA;
+ writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port));
+
+ CS_LOCK(drvdata->base);
+}
+
+static void tpda_disable(struct coresight_device *csdev, int inport,
+ int outport)
+{
+ struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
+
+ spin_lock(&drvdata->spinlock);
+ if (atomic_dec_return(&csdev->refcnt[inport]) == 0)
+ __tpda_disable(drvdata, inport);
+
+ spin_unlock(&drvdata->spinlock);
+
+ dev_dbg(drvdata->dev, "TPDA inport %d disabled\n", inport);
+}
+
+static const struct coresight_ops_link tpda_link_ops = {
+ .enable = tpda_enable,
+ .disable = tpda_disable,
+};
+
+static const struct coresight_ops tpda_cs_ops = {
+ .link_ops = &tpda_link_ops,
+};
+
+static int tpda_init_default_data(struct tpda_drvdata *drvdata)
+{
Is there a register that indicates the number of ports on the device ?
We don't seem to be using that information.
+ int atid;
+ /*
+ * TPDA must has a unique atid. This atid can uniquely
+ * identify the TPDM trace source connected to the TPDA.
+ */
+ atid = coresight_trace_id_get_system_id(coresight_get_trace_id_map());
+ if (atid < 0)
+ return atid;
+
You need to release this id at module exit. Otherwise, we are leaking
the id.
Suzuki
