[PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The OPP core now provides a unified API for setting all configuration
types, i.e. dev_pm_opp_set_config().

Lets start using it.

Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
 drivers/tty/serial/qcom_geni_serial.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 4733a233bd0c..ab667838d082 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1347,6 +1347,10 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	int irq;
 	bool console = false;
 	struct uart_driver *drv;
+	struct dev_pm_opp_config config = {
+		.clk_names = (const char *[]){ "se" },
+		.clk_count = 1,
+	};
 
 	if (of_device_is_compatible(pdev->dev.of_node, "qcom,geni-debug-uart"))
 		console = true;
@@ -1430,7 +1434,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	if (of_property_read_bool(pdev->dev.of_node, "cts-rts-swap"))
 		port->cts_rts_swap = true;
 
-	ret = devm_pm_opp_set_clkname(&pdev->dev, "se");
+	ret = devm_pm_opp_set_config(&pdev->dev, &config);
 	if (ret)
 		return ret;
 	/* OPP table is optional */
-- 
2.31.1.272.g89b43f80a514




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux