On Tue 24 May 20:43 CDT 2022, Judy Hsiao wrote: > Put sound node and lpass_cpu node settings for boards that use rt5682 > codec in the sc7280-herobrine-audio-rt5682.dtsi as there are different > choices of headset codec for herobrine projects. Common audio setting > for the internal speaker is in sc7280-herobrine.dtsi. > > This series depends on: > "Add lpass pin control support for audio on sc7280 based targets" [1] > "Add soundcard support for sc7280 based platforms" [2] > > [1] > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776 Afaict this is applied. > [2] > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=643589 > But [2] doesn't compile and hence this series doesn't compile. Can you please submit a single series with all the audio dts patches you want me to apply, where it's possible to run "make dtbs" after every single patch in the series. Thanks, Bjorn > > Changes Since V2: > -- Add bias-disable for i2s ws line. > -- Fix typo in the commit message. > > Changes Since V1: > -- Remove sound-dai-cells in sound node. > -- Add dependency list. > -- Update patch subject. > > Judy Hsiao (3): > arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1 > arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi > arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi > in villager and herobrine-r1 > > .../qcom/sc7280-herobrine-audio-rt5682.dtsi | 121 ++++++++++++++++++ > .../qcom/sc7280-herobrine-herobrine-r1.dts | 1 + > .../dts/qcom/sc7280-herobrine-villager-r0.dts | 1 + > .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 15 +++ > 4 files changed, 138 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi > > -- > 2.36.1.124.g0e6072fb45-goog >
