[PATCH 03/11] dt-bindings: display/msm: move qcom,sc7180-mdss schema to mdss.yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move schema for qcom,sc7180-mdss from dpu-sc7180.yaml to mdss.yaml so
that the dpu file describes only the DPU schema.

While we are at it, rename display-controller node to mdp to reflect
actual node name in the sc7180.dtsi file.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 .../bindings/display/msm/dpu-sc7180.yaml      | 151 +++++-------------
 .../devicetree/bindings/display/msm/mdss.yaml |  45 +++++-
 2 files changed, 82 insertions(+), 114 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
index d3c3e4b07897..f9f22ec56a21 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
@@ -10,151 +10,78 @@ maintainers:
   - Krishna Manikandan <quic_mkrishn@xxxxxxxxxxx>
 
 description: |
-  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
-  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
-  bindings of MDSS and DPU are mentioned for SC7180 target.
+  Device tree bindings for the DPU display controller for SC7180 target.
 
 properties:
   compatible:
     items:
-      - const: qcom,sc7180-mdss
+      - const: qcom,sc7180-dpu
 
   reg:
-    maxItems: 1
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
 
   reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
+    items:
+      - const: mdp
+      - const: vbif
 
   clocks:
     items:
-      - description: Display AHB clock from gcc
-      - description: Display AHB clock from dispcc
+      - description: Display hf axi clock
+      - description: Display ahb clock
+      - description: Display rotator clock
+      - description: Display lut clock
       - description: Display core clock
+      - description: Display vsync clock
 
   clock-names:
     items:
+      - const: bus
       - const: iface
-      - const: ahb
+      - const: rot
+      - const: lut
       - const: core
+      - const: vsync
 
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-
-  ranges: true
-
-  interconnects:
-    items:
-      - description: Interconnect path specifying the port ids for data bus
-
-  interconnect-names:
-    const: mdp0-mem
+  power-domains:
+    maxItems: 1
 
-  resets:
-    items:
-      - description: MDSS_CORE reset
+  operating-points-v2: true
 
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains the list of output ports from DPU device. These ports
+      connect to interfaces that are external to the DPU hardware,
+      such as DSI, DP etc. Each output port contains an endpoint that
+      describes how it is connected to an external interface.
 
     properties:
-      compatible:
-        items:
-          - const: qcom,sc7180-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: vbif
-
-      clocks:
-        items:
-          - description: Display hf axi clock
-          - description: Display ahb clock
-          - description: Display rotator clock
-          - description: Display lut clock
-          - description: Display core clock
-          - description: Display vsync clock
-
-      clock-names:
-        items:
-          - const: bus
-          - const: iface
-          - const: rot
-          - const: lut
-          - const: core
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI, DP etc. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port@0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI1)
-
-          port@2:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF0 (DP)
-
-        required:
-          - port@0
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DPU_INTF1 (DSI1)
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DPU_INTF0 (DP)
 
     required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
+      - port@0
 
 required:
   - compatible
   - reg
   - reg-names
-  - power-domains
   - clocks
   - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
+  - power-domains
+  - operating-points-v2
+  - ports
 
 additionalProperties: false
 
@@ -188,7 +115,7 @@ examples:
          iommus = <&apps_smmu 0x800 0x2>;
          ranges;
 
-         display-controller@ae01000 {
+         mdp@ae01000 {
                    compatible = "qcom,sc7180-dpu";
                    reg = <0x0ae01000 0x8f000>,
                          <0x0aeb0000 0x2008>;
diff --git a/Documentation/devicetree/bindings/display/msm/mdss.yaml b/Documentation/devicetree/bindings/display/msm/mdss.yaml
index 1cfdec9e349b..244ec36e74a4 100644
--- a/Documentation/devicetree/bindings/display/msm/mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/mdss.yaml
@@ -18,6 +18,7 @@ description: |
 properties:
   compatible:
     enum:
+      - qcom,sc7180-mdss
       - qcom,sdm845-mdss
       - qcom,mdss
 
@@ -65,20 +66,21 @@ properties:
       - description: MDSS_CORE reset
 
   interconnects:
-    minItems: 2
+    minItems: 1
     items:
       - description: MDP port 0
       - description: MDP port 1
       - description: Rotator
 
   interconnect-names:
-    minItems: 2
+    minItems: 1
     items:
       - const: mdp0-mem
       - const: mdp1-mem
       - const: rotator-mem
 
   iommus:
+    minItems: 1
     items:
       - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
       - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
@@ -108,9 +110,11 @@ allOf:
             - const: mdss
 
         interconnects:
+          minItems: 1
           maxItems: 2
 
         interconnect-names:
+          minItems: 1
           maxItems: 2
 
       required:
@@ -154,6 +158,32 @@ allOf:
             - const: iface
             - const: core
 
+        iommus:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-mdss
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Display AHB clock from gcc
+            - description: Display AHB clock from dispcc
+            - description: Display core clock
+
+        clock-names:
+          items:
+            - const: iface
+            - const: ahb
+            - const: core
+
+        iommus:
+          maxItems: 1
+
 required:
   - compatible
   - reg
@@ -175,8 +205,19 @@ patternProperties:
       compatible:
         enum:
           - qcom,mdp5
+          - qcom,sc7180-dpu
           - qcom,sdm845-dpu
 
+  "^displayport-controller@(0|[1-9a-f][0-9a-f]*)$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,sc7180-dp
+          - qcom,sc7280-dp
+          - qcom,sc8180x-dp
+          - qcom,sm8350-dp
+
   "^dsi@(0|[1-9a-f][0-9a-f]*)$":
     type: object
     properties:
-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux