From: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx>
Add generic clock initialization support for UFSHCD platform
driver. The clock info is read from device tree using standard
clock bindings. A generic max-clock-frequency-hz property is
defined to save information on maximum operating clock frequency
the h/w supports.
Signed-off-by: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx>
Signed-off-by: Dolev Raviv <draviv@xxxxxxxxxxxxxx>
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 65e3117..b0f791a 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -21,8 +21,17 @@ Optional properties:
- vccq-max-microamp : specifies max. load that can be drawn from vccq supply
- vccq2-max-microamp : specifies max. load that can be drawn from vccq2 supply
+- clocks : List of phandle and clock specifier pairs
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property.
+- max-clock-frequency-hz : List of maximum operating frequency stored in the same
+ order as the clocks property. If this property is not
+ defined or a value in the array is "0" then it is assumed
+ that the frequency is set by the parent clock or a
+ fixed rate clock source.
+
Note: If above properties are not defined it can be assumed that the supply
-regulators are always on.
+regulators or clocks are always on.
Example:
ufshc@0xfc598000 {
@@ -37,4 +46,8 @@ Example:
vcc-max-microamp = 500000;
vccq-max-microamp = 200000;
vccq2-max-microamp = 200000;
+
+ clocks = <&core 0>, <&ref 0>, <&iface 0>;
+ clock-names = "core_clk", "ref_clk", "iface_clk";
+ max-clock-frequency-hz = <100000000 19200000 0>;
};
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index 7a6edbc..2a26faa 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -170,6 +170,8 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return err;
}
+ INIT_LIST_HEAD(&hba->clk_list_head);
+
err = ufshcd_init(hba, mmio_base, pdev->irq);
if (err) {
dev_err(&pdev->dev, "Initialization failed\n");
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 51e47c4..642d80f 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -53,6 +53,71 @@ static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
return NULL;
}
+static int ufshcd_parse_clock_info(struct ufs_hba *hba)
+{
+ int ret = 0;
+ int cnt;
+ int i;
+ struct device *dev = hba->dev;
+ struct device_node *np = dev->of_node;
+ char *name;
+ u32 *clkfreq = NULL;
+ struct ufs_clk_info *clki;
+
+ if (!np)
+ goto out;
+
+ INIT_LIST_HEAD(&hba->clk_list_head);
+
+ cnt = of_property_count_strings(np, "clock-names");
+ if (!cnt || (cnt == -EINVAL)) {
+ dev_info(dev, "%s: Unable to find clocks, assuming enabled\n",
+ __func__);
+ } else if (cnt < 0) {
+ dev_err(dev, "%s: count clock strings failed, err %d\n",
+ __func__, cnt);
+ ret = cnt;
+ }
+
+ if (cnt <= 0)
+ goto out;
+
+ clkfreq = kzalloc(cnt * sizeof(*clkfreq), GFP_KERNEL);
+ if (!clkfreq) {
+ ret = -ENOMEM;
+ dev_err(dev, "%s: memory alloc failed\n", __func__);
+ goto out;
+ }
+
+ ret = of_property_read_u32_array(np,
+ "max-clock-frequency-hz", clkfreq, cnt);
+ if (ret && (ret != -EINVAL)) {
+ dev_err(dev, "%s: invalid max-clock-frequency-hz property, %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ for (i = 0; i < cnt; i++) {
+ ret = of_property_read_string_index(np,
+ "clock-names", i, (const char **)&name);
+ if (ret)
+ goto out;
+
+ clki = devm_kzalloc(dev, sizeof(*clki), GFP_KERNEL);
+ if (!clki) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ clki->max_freq = clkfreq[i];
+ clki->name = kstrdup(name, GFP_KERNEL);
+ list_add_tail(&clki->list, &hba->clk_list_head);
+ }
+out:
+ kfree(clkfreq);
+ return ret;
+}
+
#define MAX_PROP_SIZE 32
static int ufshcd_populate_vreg(struct device *dev, const char *name,
struct ufs_vreg **out_vreg)
@@ -266,6 +331,12 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev)
hba->vops = get_variant_ops(&pdev->dev);
+ err = ufshcd_parse_clock_info(hba);
+ if (err) {
+ dev_err(&pdev->dev, "%s: clock parse failed %d\n",
+ __func__, err);
+ goto out;
+ }
err = ufshcd_parse_regulator_info(hba);
if (err) {
dev_err(&pdev->dev, "%s: regulator init failed %d\n",
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ef8519e..b033702 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -3350,6 +3350,80 @@ out:
return ret;
}
+static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
+{
+ int ret = 0;
+ struct ufs_clk_info *clki;
+ struct list_head *head = &hba->clk_list_head;
+
+ if (!head || list_empty(head))
+ goto out;
+
+ list_for_each_entry(clki, head, list) {
+ if (!IS_ERR_OR_NULL(clki->clk)) {
+ if (on && !clki->enabled) {
+ ret = clk_prepare_enable(clki->clk);
+ if (ret) {
+ dev_err(hba->dev, "%s: %s prepare enable failed, %d\n",
+ __func__, clki->name, ret);
+ goto out;
+ }
+ } else if (!on && clki->enabled) {
+ clk_disable_unprepare(clki->clk);
+ }
+ clki->enabled = on;
+ dev_dbg(hba->dev, "%s: clk: %s %sabled\n", __func__,
+ clki->name, on ? "en" : "dis");
+ }
+ }
+out:
+ if (ret) {
+ list_for_each_entry(clki, head, list) {
+ if (!IS_ERR_OR_NULL(clki->clk) && clki->enabled)
+ clk_disable_unprepare(clki->clk);
+ }
+ }
+ return ret;
+}
+
+static int ufshcd_init_clocks(struct ufs_hba *hba)
+{
+ int ret = 0;
+ struct ufs_clk_info *clki;
+ struct device *dev = hba->dev;
+ struct list_head *head = &hba->clk_list_head;
+
+ if (!head || list_empty(head))
+ goto out;
+
+ list_for_each_entry(clki, head, list) {
+ if (!clki->name)
+ continue;
+
+ clki->clk = devm_clk_get(dev, clki->name);
+ if (IS_ERR(clki->clk)) {
+ ret = PTR_ERR(clki->clk);
+ dev_err(dev, "%s: %s clk get failed, %d\n",
+ __func__, clki->name, ret);
+ goto out;
+ }
+
+ if (clki->max_freq) {
+ ret = clk_set_rate(clki->clk, clki->max_freq);
+ if (ret) {
+ dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n",
+ __func__, clki->name,
+ clki->max_freq, ret);
+ goto out;
+ }
+ }
+ dev_dbg(dev, "%s: clk: %s, rate: %lu\n", __func__,
+ clki->name, clk_get_rate(clki->clk));
+ }
+out:
+ return ret;
+}
+
static int ufshcd_variant_hba_init(struct ufs_hba *hba)
{
int err = 0;
@@ -3409,14 +3483,22 @@ static int ufshcd_hba_init(struct ufs_hba *hba)
{
int err;
- err = ufshcd_init_vreg(hba);
+ err = ufshcd_init_clocks(hba);
if (err)
goto out;
- err = ufshcd_setup_vreg(hba, true);
+ err = ufshcd_setup_clocks(hba, true);
if (err)
goto out;
+ err = ufshcd_init_vreg(hba);
+ if (err)
+ goto out_disable_clks;
+
+ err = ufshcd_setup_vreg(hba, true);
+ if (err)
+ goto out_disable_clks;
+
err = ufshcd_variant_hba_init(hba);
if (err)
goto out_disable_vreg;
@@ -3425,6 +3507,8 @@ static int ufshcd_hba_init(struct ufs_hba *hba)
out_disable_vreg:
ufshcd_setup_vreg(hba, false);
+out_disable_clks:
+ ufshcd_setup_clocks(hba, false);
out:
return err;
}
@@ -3433,6 +3517,7 @@ static void ufshcd_hba_exit(struct ufs_hba *hba)
{
ufshcd_variant_hba_exit(hba);
ufshcd_setup_vreg(hba, false);
+ ufshcd_setup_clocks(hba, false);
}
/**
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index c0232f9..bc0f7ed 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -155,6 +155,22 @@ struct ufs_dev_cmd {
struct ufs_query query;
};
+/**
+ * struct ufs_clk_info - UFS clock related info
+ * @list: list headed by hba->clk_list_head
+ * @clk: clock node
+ * @name: clock name
+ * @max_freq: maximum frequency supported by the clock
+ * @enabled: variable to check against multiple enable/disable
+ */
+struct ufs_clk_info {
+ struct list_head list;
+ struct clk *clk;
+ const char *name;
+ u32 max_freq;
+ bool enabled;
+};
+
#define PRE_CHANGE 0
#define POST_CHANGE 1
/**
@@ -221,6 +237,7 @@ struct ufs_hba_variant_ops {
* @dev_cmd: ufs device management command information
* @auto_bkops_enabled: to track whether bkops is enabled in device
* @vreg_info: UFS device voltage regulator information
+ * @clk_list_head: UFS host controller clocks list node head
*/
struct ufs_hba {
void __iomem *mmio_base;
@@ -282,6 +299,7 @@ struct ufs_hba {
bool auto_bkops_enabled;
struct ufs_vreg_info vreg_info;
+ struct list_head clk_list_head;
};
#define ufshcd_writel(hba, val, reg) \
--
1.8.5.2
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
